Laser cutting performances for thick steel specimens studied by molten metal removal conditions
Authors:
- 4 July 2017
- journal article
- research article
- Published by Taylor & Francis in Journal of Nuclear Science and Technology
- Vol. 54 (9) , 1011-1017
Abstract
Laser cutting performances for thick carbon steel and stainless steel specimens up to 300 mm in thickness were studied to dismantle large steel objects. The cutting performances were summarized based on the assist gas flow rate and the front kerf width, and the range for appropriate cutting conditions was shown. Gas pressure in the kerf region required for molten metal removal was estimated from the pressure loss on the kerf surface, which depended on the gas flow rate and the kerf width. The relation to keep sufficient gas pressure in the kerf well corresponded to the experimental relations for appropriate cutting. Drag force to the molten metal on the kerf surface was also estimated, which varied by the structures and materials. The behaviors such as cavity formation and its expansion in the kerf region at the unsuccessful cutting trials were well explained. The results are informative for the development of the laser cutting technology applied to the thick steel specimen for the nuclear decommissioning.Keywords
This publication has 6 references indexed in Scilit:
- Observation of the molten metal behaviors during the laser cutting of thick steel specimens using attenuated process imagesJournal of Nuclear Science and Technology, 2017
- Laser cutting of thick steel plates and simulated steel components using a 30 kW fiber laserJournal of Nuclear Science and Technology, 2015
- The development of thermal and mechanical cutting technology for the dismantlement of the internal core of Fukushima Daiichi NPSJournal of Nuclear Science and Technology, 2014
- Prospects of Optical and Laser Technology for Decommissioning Nuclear Power PlantsThe Review of Laser Engineering, 2013
- The Potential of Laser Cutting and Snake Arm Robots in Aspects of Nuclear DecommissioningThe Review of Laser Engineering, 2013
- Dismantling of JPDR Internals Using Underwater Plasma Arc Cutting Technique Operated by Robotic ManipulatorJournal of Nuclear Science and Technology, 1988