Low-cost 3D printed inertial flow microfluidic devices for cellular isolation in liquid biopsies
Authors:
Open Access
- 8 November 2023
- journal article
- research article
- Published by Frontiers Media SA in Frontiers in Lab on a Chip Technologies
- Vol. 2, 1175668
Abstract
Microfluidic devices for biomedical applications manufactured by conventional lithography often lack flexibility in design integration. Limitations in aspect ratio or in the ability to integrate microfluidic elements located in different planes reduce the available design options. Regarding this, 3D printing offers several advantages over traditional fabrication techniques. However, 3D printing technologies indeed show some limitations in the resolution of the microstructures obtained in comparison with standard lithography. We have optimized a low-cost multi-system combining standard lithography and 3D printing to design inertial flow microfluidic devices with different channels dimensions for cell concentration or isolation in blood, which are adaptable to cancer tumor cell (CTC) detection in liquid biopsies. CTC separation from complete blood using microfluidic devices often faces the challenge of leukocyte contamination due to their similar size with CTC. However, with 3D printing, we can create larger channels than those produced through lithography, enabling the use of beads coated with antibodies that bind to leukocytes expressing the CD45+ receptor. This binding results in larger particles that could be separated from the CTCs in the microfluidic devices, providing a more purified CTC sample. Microfluidic spiral structures were obtained with standard lithography for a first purification step using rectangular channel of 152 µm height and 500 µm width channels. The blood samples after processingE were analyzed by flow cytometry and revealed a recovery efficiency using two different CTC models of 80% ± 4% and 95% ± 4%. Also, the system enables 97.5% ± 1.89% and 83.4% ± 3.6% depletion of erythrocytes and leukocytes respectively. In addition, single or double microfluidic spiral structures to reduce leukocyte contamination using beads were directly fabricated using stereolithography 3D printing. In the single device with a channel of 600 μm and 1.4 mm of height and width respectively, and in the case of the device with two spirals placed on different planes, with a channel of 800 μm and 1.4 mm of height and width respectively. In addition, a read-out system based on an electronic circuit with piezoelectric micropumps, and a low-cost optical microscope was designed and adapted. This configuration avoids usual limitations when using syringe pumps and big microscopes, such as lack of sample recirculation, loss of CTCs during stabilization, blood sedimentation in the syringe, and reduced portability. Finally, combining a microfluidic spiral to separate red blood cells and partially leucocytes with the 3D microfluidic spiral to separate particles as the beads coated with CD45+ antibodies, could be possible to achieve a total leukocyte depletion up to 91%, and a maximum recovery of cancer cells up to 95%.Keywords
This publication has 38 references indexed in Scilit:
- Inertial Focusing for Tumor Antigen–Dependent and –Independent Sorting of Rare Circulating Tumor CellsScience Translational Medicine, 2013
- Isolation and retrieval of circulating tumor cells using centrifugal forcesScientific Reports, 2013
- Label-free isolation of circulating tumor cells in microfluidic devices: Current research and perspectivesBiomicrofluidics, 2013
- Let there be chip—towards rapid prototyping of microfluidic devices: one-step manufacturing processesAnalytical Methods, 2011
- Hematological and plasma biochemistry in Psammophilus blanfordanus (Sauria: Agamidae)Comparative Clinical Pathology, 2011
- High-throughput cell cycle synchronization using inertial forces in spiral microchannelsLab on a Chip, 2011
- Inertial microfluidics for continuous particle separation in spiral microchannelsLab on a Chip, 2009
- Deformability study of breast cancer cells using microfluidicsBiomedical Microdevices, 2008
- Continuous inertial focusing, ordering, and separation of particles in microchannelsProceedings of the National Academy of Sciences, 2007
- The origins and the future of microfluidicsNature, 2006