Numerical position optimization of an over-the-wing mounted engine installation
Authors:
Open Access
- 23 December 2020
- journal article
- research article
- Published by Springer Nature in CEAS Aeronautical Journal
- Vol. 12 (1) , 135-146
Abstract
The Collaborative Research Center 880 is investigating different technologies and configurative variants for the purpose of short take-off and landing (STOL) capabilities, ranging from high-lift systems with Coandӑ flaps to unusual but potentially more efficient engine arrangements. The present study focuses on the reference configuration 3 (REF3). This configuration is characterized by an UHBR over-the-wing nacelle (OWN) located above the wing trailing edge. Starting from the wing/body configuration the installation effects of the OWN were investigated. A fully automatized surrogate based optimization was used to evaluate the impact of an engine position variation in vertical and horizontal direction to observe fundamental aerodynamic interactions between wing and OWN in cruise flight conditions. Due to the presence of OWN and pylon, a distinct disturbance on the wing upper surface could be observed leading to significant interference effects. Nevertheless, the overall cruise drag of REF3 could be improved by 37 drag counts or nearly 11% due to the position optimization.Keywords
Funding Information
- Deutsches Zentrum für Luft- und Raumfahrt e. V. (DLR)
This publication has 7 references indexed in Scilit:
- Assessment of the Noise Immission along Approach and Departure Flightpaths for Different SFB 880 Vehicle Concepts2018
- Multidisciplinary Analysis of Aerodynamics-Propulsion Coupling for the OWN Concept2018
- TAU-SOLAR Contributions to the 3rd High Lift Prediction Workshop2018
- Over Wing Nacelle Installations for Improved Energy Efficiency2013
- DLR Contribution to the First High Lift Prediction Workshop2011
- Overview of the Hybrid RANS Code TAU2006
- A one-equation turbulence model for aerodynamic flows1992