Integration of conductivity probe with optical and x-ray imaging systems for local air–water two-phase flow measurement
- 23 August 2018
- journal article
- research article
- Published by IOP Publishing in Measurement Science and Technology
- Vol. 29 (10) , 105301
Abstract
Various techniques have been developed in the past to measure the different parameters in two-phase flow. Among them, the multi-sensor conductivity probe is one of the most commonly used techniques because of its good overall performance. Recently, more advanced techniques, such as high-speed optical imaging and fast x-ray densitometry, have matured and become easily accessible. The main objective of this work is to compare and integrate these different techniques, to achieve a more accurate and complete measurement of two-phase flow. In this study, a double-sensor conductivity probe is used to measure the local time-averaged parameters along the radial direction of a 2.54 cm ID round pipe. An x-ray densitometry system is used to measure the chordal averaged void fraction and gas velocity. A high-speed camera system is employed to provide a visualization of the two-phase flow structure and obtain the line-averaged gas velocity. The unique advantages and main uncertainties of these three techniques are analyzed by considering their measuring principles and possible issues in practical measurements. From this, a method is developed to integrate the data obtained by the optical and x-ray systems into the probe signal processing. Better accuracy can be achieved using this method for various local two-phase flow parameters, including the void fraction, bubble velocity and superficial gas velocity, compared to the original probe measurements.Keywords
Funding Information
- The DOE Office of Nuclear Energy’s Nuclear Energy University Program
- U.S. Nuclear Regulatory Commission
This publication has 12 references indexed in Scilit:
- Experimental study of bubbly flow using image processing techniquesNuclear Engineering and Design, 2016
- Development of a robust image processing technique for bubbly flow measurement in a narrow rectangular channelInternational Journal of Multiphase Flow, 2016
- Calibrating the X-ray attenuation of liquid water and correcting sample movement artefacts duringin operandosynchrotron X-ray radiographic imaging of polymer electrolyte membrane fuel cellsJournal of Synchrotron Radiation, 2016
- Assessment Criteria for Computational Fluid Dynamics Validation Benchmark Experiments2014
- Experimental study of interfacial area transport in air–water two phase flow in a scaled 8×8 BWR rod bundleInternational Journal of Multiphase Flow, 2013
- Experimental study of non-uniform inlet conditions and three-dimensional effects of vertical air–water two-phase flow in a narrow rectangular ductInternational Journal of Heat and Fluid Flow, 2013
- Comparison between wire-mesh sensors and conductive needle-probes for measurements of two-phase flow parametersNuclear Engineering and Design, 2009
- Benchmarking of the five-sensor probe method for a measurement of an interfacial area concentrationExperiments in Fluids, 2006
- Benchmarking and improvements of measurement techniques for local-time-averaged two-phase flow parametersExperiments in Fluids, 2003
- Development of the miniaturized four-sensor conductivity probe and the signal processing schemeInternational Journal of Heat and Mass Transfer, 2000