Development and evaluation of a mobile laboratory for collecting short-duration near-road fine and coarse ambient particle and road dust samples
- 1 February 2021
- journal article
- research article
- Published by Taylor & Francis in Journal of the Air & Waste Management Association
- Vol. 71 (2) , 118-128
Abstract
This study used fine and coarse PM concentrator technology in a Mobile Particle Concentrator Platform (MPCP) designed and built to allow the collection of large amounts of ambient PM, enabling time-resolved speciation analysis, which would not be feasible using conventional methods. One hour of sampling yielded sufficient sample loading for trace elemental analysis using X-Ray Fluorescence (XRF). In addition, we developed a novel Road Dust Aerosolizer (RDA) sampler in order to collect PM2.5 and PM10 surface road dust in situ. This sampler aerosolizes dust from the road surface, simulating ambient road dust resuspension, resulting in measured PM composition and size more appropriately (and less labor-intensive) than those obtained from studies using bulk road dust sieved and re-suspended in the laboratory. Overall, our modified fine and coarse particle concentrators yielded good reproducibility between co-located samples and sufficient loading for trace elemental analysis. For particle mass concentration, we observed a relative error of 3% and 4% among pairs of filters for fine and coarse concentrators, respectively; confirming that the mass collected on an unweighted quartz filter in parallel with a Teflon filter will have the same PM mass as the weighed Teflon filter. For samples with elements that are well above the LOD, relative uncertainty values were between 5 and 10% for the fine and 3 and 10% for the coarse. Our results show that the RDA system has an excellent precision for mass and elements as well. The relative error for mass is 7% for PM10 and 3% for PM2.5 within pairs and ranged from 2 to10% for elements. In conclusion, we developed a method for collecting PM10 and PM2.5 near-road air and surface road dust for short durations, which allows investigation of the composition of direct (airborne) and indirect (re-suspended road dust) non-tailpipe vehicular emissions.Keywords
Funding Information
- United States Environmental Protection Agency (RD-83587201)
- Health Effects Institute/United States Environmental Protection Agency (Assistance Award No. CR-83467701)
This publication has 55 references indexed in Scilit:
- A Mobile Air Pollution Monitoring Data SetData, 2018
- Chemical profiling of PM10 from urban road dustScience of The Total Environment, 2018
- Vehicles as outdoor BFR sources: Evidence from an investigation of BFR occurrence in road dustChemosphere, 2017
- High-Resolution Air Pollution Mapping with Google Street View Cars: Exploiting Big DataEnvironmental Science & Technology, 2017
- Distribution of heavy metals in road dust along an urban-rural gradient in MassachusettsAtmospheric Environment, 2011
- Comparison of Source Identification of Metals in Road-Dust and SoilSoil and Sediment Contamination: An International Journal, 2009
- Spatial and chemical patterns of PM10 in road dust deposited in urban environmentAtmospheric Environment, 2009
- Fresh Gasoline Emissions, Not Paved Road Dust, Alter Cardiac Repolarization in ApoE−/− MiceCardiovascular Toxicology, 2006
- Development of a High-Volume Concentrated Ambient Particles System (CAPS) for Human and Animal Inhalation Toxicological StudiesInhalation Toxicology, 2003
- Development and laboratory characterization of a prototype coarse particle concentrator for inhalation toxicological studiesJournal of Aerosol Science, 2002