Ablation study in the capillary discharge of an electrothermal gun
Authors:
- 1 March 2006
- journal article
- conference paper
- Published by AIP Publishing in Journal of Applied Physics
- Vol. 99 (5) , 053301
Abstract
In this paper, we study the ablation phenomena associated with the operation of a capillary discharge for an electrothermal gun. Electrothermal-chemical (ETC) guns are used for enhancement of ignition and combustion of an energetic propellant. One of the major components of the ETC system is a plasma source based on a capillary discharge. In this paper, a model of the capillary discharge is developed. In this model, primary attention is paid to the ablation phenomenon. Different characteristic subregions near the ablated surface, namely, a space-charge sheath, a Knudsen layer, and a hydrodynamic layer, are considered. In this formulation, the ablation rate is determined by the parameters at the edge of the Knudsen layer. The kinetic approach is used to determine the parameters at the interface between the kinetic Knudsen layer and the hydrodynamic layer. Coupling the solution of the nonequilibrium Knudsen layer with the hydrodynamic layer provides a self-consistent solution for the ablation rate. According to the model predictions, the peak electron temperature is about 1.4 eV, the polyethylene surface temperature is about 700 K, and the pressure is about 10 MPa. It is found that the ablation rate increases with the capillary length. The ablated mass and the predicted total pressure agree with previous experimental observations.Keywords
This publication has 28 references indexed in Scilit:
- Experiments to define plasma-propellant interactionsIEEE Transactions on Magnetics, 2003
- Stark spectroscopy measurements of electron density of ablative discharges in Teflon-(CF2)ncapillariesJournal of Physics D: Applied Physics, 2000
- Electrical discharge in the Teflon cavity of a coaxial pulsed plasma thrusterIEEE Transactions on Plasma Science, 2000
- Study of a fast ablative capillary discharge dedicated to soft x-ray productionReview of Scientific Instruments, 2000
- Arc - wall interaction modelling in a low-voltage circuit breakerJournal of Physics D: Applied Physics, 1997
- A proof of the need for consistent treatment in modelling of capillary ablative dischargesJournal of Physics D: Applied Physics, 1995
- Energy-mass coupling in high-pressure liquid-injected arcsIEEE Transactions on Plasma Science, 1991
- A theoretical model for the physical processes in the confined high pressure discharges of electrothermal launchersIEEE Transactions on Magnetics, 1989
- Theoretical predictions of ablation-stabilised arcs confined in cylindrical tubesJournal of Physics D: Applied Physics, 1984
- The ablation dominated polymethylmethacrylate arcJournal of Physics D: Applied Physics, 1980