Thermal Characteristics of Latent Heat Thermal Storage: Comparison of Aluminum Foam and Mesh Configurations
- 31 March 2015
- journal article
- research article
- Published by Taylor & Francis in Numerical Heat Transfer, Part A: Applications
- Vol. 68 (1) , 99-116
Abstract
The thermal characteristics of the phase change process due to three different configurations of the solution domain are studied using n-octadecene as a phase change material (PCM). The configurations include the PCM only, aluminum foam filled with the PCM, and aluminum mesh in the presence of the PCM. The time taken for the complete melting of the PCM is predicted for each configuration. In the analysis, the amount of PCM is kept the same for all configurations, and the amount of aluminum material is kept constant in the aluminum foam and the aluminum mesh configurations. The performance characteristics are the dimensionless temperature ratio ((Tmax − Tb)/(Tmax − Tin), where Tmax is the maximum temperature, Tb is the bulk temperature, and Tin is the initial temperature), the minimum liquid fraction, the ratio of the cumulative energy stored during phase change over the total energy input to the storage system, and the total molten mass over the total mass of the PCM in each configuration. An experiment is conducted to verify the predictions of the numerical simulations for the aluminum foam. It is found that the experimental findings of the molten states of the PCM in the aluminum foam agree well with their counterparts predicted from the simulations. Aluminum mesh in the presence of the PCM significantly shortens the time required for complete melting in the thermal storage system.Keywords
Funding Information
- The authors acknowledge the funded project RG 1204 through the support of the Thermoelectric Group formed by the Deanship of Scientific Research at King Fahd University of Petroleum and Minerals, Dhahran, Saudi Arabia, for this work.
This publication has 21 references indexed in Scilit:
- Impact Factors Analysis of the Enthalpy Method and the Effective Heat Capacity Method on the Transient Nonlinear Heat Transfer in Phase Change Materials (PCMs)Numerical Heat Transfer, Part A: Applications, 2013
- Effect of Laminar and Turbulent Buoyancy-Driven Flows on Thermal Energy Storage using Supercritical FluidsNumerical Heat Transfer, Part A: Applications, 2013
- Thermal properties and stability of n‐octadecane based composites containing multiwalled carbon nanotubesPolymer Composites, 2011
- A Spectral Method for Low-Dimensional Description of Melting/Solidification Within Shape-Stabilized Phase-Change MaterialsNumerical Heat Transfer, Part B: Fundamentals, 2009
- Carbon nanoadditives to enhance latent energy storage of phase change materialsJournal of Applied Physics, 2008
- Enhancement of Heat Transfer in Latent Heat Storage Modules with Internal FinsNumerical Heat Transfer, Part A: Applications, 2007
- Design of Thermal Initial and Boundary Conditions to Control the Expansion of Water-Based Phase-Change Materials in Low GravityNumerical Heat Transfer, Part A: Applications, 2006
- A COMPUTATIONAL MODEL OF COUPLED HEAT AND MOISTURE TRANSFER WITH PHASE CHANGEIN GRANULAR SUGAR DURING VARYING ENVIRONMENTAL CONDITIONSNumerical Heat Transfer, Part A: Applications, 2004
- SIMULATION OF TWO-DIMENSIONAL MULTIPLE-PHASE-CHANGE MOVING-BOUNDARY PROBLEMS BY THE DUAL-RECIPROCITY BOUNDARY-ELEMENT METHODNumerical Heat Transfer, Part B: Fundamentals, 2003
- THERMAL MANAGEMENT OF HIGH TEMPERATURE PULSED ELECTRONICS USING METALLIC PHASE CHANGE MATERIALSNumerical Heat Transfer, Part A: Applications, 2002