Recovery of Magnesium from Ferronickel Slag to Prepare Magnesium Oxide by Sulfuric Acid Leaching
Open Access
Abstract
This paper provides a technical approach for efficiently recovering Mg from ferronickel slag to produce high-quality magnesium oxide (MgO) by using the sulfuric acid leaching method under atmospheric pressure. The leaching rate of magnesium is 84.97% after a typical one-step acid leaching process, which is because Mg in FNS mainly exists in the forsterite (Mg2SiO4) phase, which is chemically stable. In order to increase the leaching rate, a two-step acid leaching process was proposed in this work, and the overall leaching rate reached up to 95.82% under optimized conditions. The response surface methodology analysis for parameter optimization and Mg leaching rules revealed that temperature was the most critical factor affecting the Mg leaching rate when the sulfuric acid concentration was higher than 2 mol/L, followed by acid leaching time. Furthermore, interactive behavior also existed between the leaching temperature and leaching time. The leaching kinetics of magnesium from FNS followed a shrinkage-nuclear-reaction model with composite control, which were chemically controlled at lower temperatures and diffusion controlled at higher temperatures; the corresponding apparent activation energy was 19.57 kJ/mol. The leachate can be used to obtain spherical-like alkali magnesium carbonate particles with diameters of 5–10 μm at 97.62% purity. By using a further calcination process, the basic magnesium carbonate can be converted into a light magnesium oxide powder with a particle size of 2–5 μm (MgO content 94.85%), which can fulfill first-level quality standards for industrial magnesium oxide in China.Keywords
This publication has 32 references indexed in Scilit:
- Optimal thermal cycle for production of glass–ceramic based on wastes from ferronickel manufactureCeramics International, 2015
- Leaching behavior of copper from waste printed circuit boards with Brønsted acidic ionic liquidWaste Management, 2014
- Utilization of nickel slag using selective reduction followed by magnetic separationTransactions of Nonferrous Metals Society of China, 2013
- Bioprocessing of Mining and Metallurgical Wastes Containing Non-Ferrous and Precious MetalsAdvanced Materials Research, 2013
- Effect of sulphate and nitrate anions on heavy metal immobilisation in ferronickel slag geopolymersApplied Clay Science, 2013
- Co-treatment of converter slag and pyrrhotite tailings via high pressure oxidative leachingJournal of Hazardous Materials, 2011
- Recovery of cobalt from converter slag of Chambishi Copper Smelter using reduction smelting processTransactions of Nonferrous Metals Society of China, 2011
- Cleaning of waste smelter slags and recovery of valuable metals by pressure oxidative leachingJournal of Hazardous Materials, 2008
- Evaluation of Contributions of Acid and Ligand to Ni, Co, and Fe Dissolution from Nonferrous Smelter Slags in Aqueous Sulfur DioxideIndustrial & Engineering Chemistry Research, 2002
- The kinetics of the sulphuric acid leaching of nickel and magnesium from reduction roasted serpentineHydrometallurgy, 1978