Research on Frequency-Modulated Continuous-Wave Laser Radar Imaging Technology Based on Two-Axis Galvanometer
- 29 July 2025
- journal article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Instrumentation and Measurement
- Vol. 74 (00189456) , 1-12
Abstract
Frequency Modulated Continuous Wave (FMCW) Light Detection and Ranging (LiDAR) has received extensive attention, owing to its high robustness and accuracy, and its extensive applications in the automotive and robotics domains. However, mainstream demonstrations predominantly rely on high-performance yet expensive instrumentation, which poses a significant barrier to the widespread manufacturing of FMCW LiDAR systems. In this study, we introduce a novel Laser Frequency Modulation and Beat Signal Processing module (LFM-BSP) realized on a Field Programmable Gate Array (FPGA). The LFM-BSP is distinguished by its full functionality, encompassing all essential electronic operations required by FMCW LiDARs. The LFM-BSP adopts pre-distortion approach to generate linear modulation waveform of nonlinear laser source. Utilizing the waveform, a fully functional, standalone FMCW LiDAR prototype was developed based on the LFM-BSP. The prototype incorporates a 2-axis galvanometer to facilitate beam steering. Simultaneous ranging and velocimetry experiments were performed, resulting in ranging and velocimetry precision of 0.011 m and 0.059 m/s, respectively. Furthermore, the prototype’s capability in 4D point cloud imaging was evaluated. The results suggest that the LFM-BSP is highly suitable for automotive LiDAR applications, thereby offering a practical framework for the development of next-generation monolithic FMCW LiDAR systems.Keywords
Funding Information
- National Natural Science Foundation of China (62301230, 62105173, 62105174)
- National Key Research and Development Program of China (2022YFB2804504)
- Major Scientific and Technological Program of Jilin Province (20210301014GX)
- Program for Jilin University Science and Technology Innovative Research Team (JLUSTIRT, 2021TD-39)
This publication has 38 references indexed in Scilit:
- Fourier domain-based iterative predistortion method for high-repetition-rate optical linear frequency sweepMeasurement, 2024
- A LiDAR-Based Recommendation System to Improve Sitting Posture Respecting PrivacyIEEE Journal of Biomedical and Health Informatics, 2024
- SiN‐On‐SOI Optical Phased Array LiDAR for Ultra‐Wide Field of View and 4D SensingLaser & Photonics Reviews, 2024
- Photonic-electronic integrated circuit-based coherent LiDAR engineNature Communications, 2024
- Wide range linearization calibration method for DFB Laser in FMCW LiDAROptics and Lasers in Engineering, 2023
- Optical frequency shifted FMCW Lidar system for unambiguous measurement of distance and velocityOptics and Lasers in Engineering, 2023
- Video-rate high-precision time-frequency multiplexed 3D coherent rangingNature Communications, 2022
- Nanophotonics for light detection and ranging technologyNature Nanotechnology, 2021
- Optimized Foothold Planning and Posture Searching for Energy-Efficient Quadruped Locomotion over Challenging Terrains2020
- Linearity Requirement for a Linear Frequency Modulation LidarOptical Review, 1999