Effect of two different rubbers as secondary binders on the friction and wear characteristics of non-asbestos organic (NAO) brake friction materials
- 20 March 2018
- journal article
- research article
- Published by SAGE Publications in Tribology - Materials, Surfaces & Interfaces
- Vol. 12 (2) , 71-84
Abstract
Binder provides structural integrity by holding all ingredients in the composition of a brake friction material. The modified binders have played a major role in improving the frictional performance and thermal resistance of the friction material. The present research work evaluates the influence of secondary binders (Nitrile Butadiene rubber (NBR) and Styrene Butadiene rubber (SBR)) on the tribological performance of the friction material using a full-scale inertia brake dynamometer as per JASO C406 standard. Three brake pads were developed by varying the type and composition of secondary rubber binder (5%NBR, 5%SBR and 2.5%NBR + 2.5%SBR) with rest of the ingredients kept unaltered. It was found that the quantity of SBR rubber powder present as secondary binder improved dry and wet recovery. Friction coefficient (μ) exhibited better stability during the fade with the inclusion of both the rubber powders. The friction material with the inclusion of both the NBR and SBR rubber powders exhibited overall better performance than compared to the inclusion of only one secondary binder rubber in the composition. The worn-out surface of the developed friction materials and the counter discs were characterised using FESEM.Keywords
This publication has 43 references indexed in Scilit:
- Performance sensitivity of hybrid phenolic composites in friction braking: Effect of ceramic and aramid fibre combinationWear, 2010
- An experimental study on the effects of manufacturing parameters on the tribological properties of brake lining materialsWear, 2010
- Theoretical and experimental analysis of the thermal, fade and wear characteristics of rubber-based composite friction materialsWear, 2010
- Effects of rubber curing ingredients and phenolic‐resin on mechanical, thermal, and morphological characteristics of rubber/phenolic‐resin blendsJournal of Applied Polymer Science, 2008
- Thermally conductive rubber-based composite friction materials for railroad brakes – Thermal conduction characteristicsComposites Science and Technology, 2007
- Performance of ceramic enhanced phenolic matrix brake lining materials for automotive brake liningsWear, 2005
- Cure characteristics and mechanical properties of styrene–butadiene rubber/acrylonitrile butadiene rubberMaterials Letters, 2005
- Review of automotive brake friction materialsProceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering, 2004
- Composites as friction materials: Recent developments in non‐asbestos fiber reinforced friction materials—a reviewPolymer Composites, 1997
- Friction properties of a phenolic resin filled with iron and graphite—Sensitivity to load, speed and temperatureWear, 1974