Investigations on the catastrophic damage in multilayer dielectric films
Authors:
- 29 March 2013
- journal article
- research article
- Published by Optica Publishing Group in Applied Optics
- Vol. 52 (10) , 2194-2199
Abstract
coatings are always fluence-limited by a class of rare catastrophic failures induced by a nanosecond laser with a wavelength of 1053 nm. The catastrophic damage in coatings behaves as the damage growth with repeated laser irradiation, and thus eventually limits the mirror performance. Understanding the damage processes and mechanisms associated with the catastrophic damage are important for reducing the occurrence of the catastrophic failure and allowing the coatings to survive at the high fluence required by high laser systems. The rough damage behavior of the catastrophic failure at the proper critical fluence is present. The pit and delamination in the catastrophic failure are investigated to find the possible reasons leading to the catastrophic failure. The experimental results indicate that nodular defect originated from the substrate easily incurs the catastrophic damage. The electric field enhancements of the pit and the substrate impurities may contribute to this phenomenon. The delamination is always present on the left of the pit when laser irradiates from left to right at oblique incidence, which may be related to the plasma plume toward the laser incidence.
Keywords
Funding Information
- National Natural Science Foundation of China (NSFC) (61205137)
This publication has 18 references indexed in Scilit:
- Characteristics of plasma scalds in multilayer dielectric filmsApplied Optics, 2011
- Fabrication of mitigation pits for improving laser damage resistance in dielectric mirrors by femtosecond laser machiningApplied Optics, 2011
- Searching for optimal mitigation geometries for laser-resistant multilayer high-reflector coatingsApplied Optics, 2011
- Laser damage study of nodules in electron-beam-evaporated HfO_2/SiO_2 high reflectorsApplied Optics, 2011
- Further investigation of the characteristics of nodular defectsApplied Optics, 2010
- Advantages of evaporation of hafnium in a reactive environment formanufacture of high-damage-threshold multilayer coatings by electron-beam deposition1999
- Role of starting material composition in interfacial damage morphology of hafnia-silica multilayer coatings1999
- Effect of SiO2 overcoat thickness on laser damage morphology of HfO2/SiO2 Brewster's angle polarizers at 1064 nm1997
- Growth of laser-induced damage during repetitive illumination of HfO2/SiO2 multilayer mirror and polarizer coatings1997
- Morphologies of laser-induced damage in hafnia-silica multilayer mirror and polarizer coatings1996