Effects of Cake Collapse Caused by Deposition of Fractal Aggregates on Pressure Drop during Ceramic Filtration
- 13 April 2011
- journal article
- research article
- Published by American Chemical Society (ACS) in Environmental Science & Technology
- Vol. 45 (10) , 4415-4421
Abstract
A cake collapse model was developed by taking the combined effects of fractal dimension, relaxation ratio, coordination number, and aggregate diameter into consideration. The cake porosity including intraaggregate and interaggregate porosities was modeled successively by three typical coordination numbers (n = 6, 8, and 12). Accordingly, an inversion method made it possible to deduce the coordination number using the measured cake porosities, and the reverse-calculated value with minimum error and the corresponding relaxation ratios were applied as the parameters for the model. As a result, the profiles of intraaggregate and interaggregate porosities and cake porosity were respectively predicted in contrast to the integrated variation of the relaxation ratio and the fractal dimension. Furthermore, a comparison between the model predictions of the cake pressure drop gradients with and without aggregate compression was conducted to validate the presence of cake collapse. The results show that the predictions based on the proposed collapse model are in agreement with the experiments, and the coordination number is one of the key factors that must be incorporated into the cake collapse models.Keywords
This publication has 23 references indexed in Scilit:
- Experiment and simulation of diffusion of micron-particle in porous ceramic vesselTransactions of Nonferrous Metals Society of China, 2010
- An improved box-counting method for image fractal dimension estimationPattern Recognition, 2009
- Modelling the co-ordination number of a packed bed of spheres with distributed sizes using a CT scannerMinerals Engineering, 2006
- Prediction of three-dimensional fractal dimensions using the two-dimensional properties of fractal aggregatesAdvances in Colloid and Interface Science, 2004
- Moisture-induced caking of boric acid powderPowder Technology, 2004
- A procedure for calculating pressure drop during the build-up of dust filter cakesChemical Engineering and Processing - Process Intensification, 2003
- Patchy cleaning of rigid gas filters—transient regeneration phenomena comparison of modelling to experimentPowder Technology, 2002
- Further work on pulse-jet fabric filtration modelingPowder Technology, 2001
- Prediction of drying rate curves on sintered spheres of glass beads in superheated steam under vacuumIndustrial & Engineering Chemistry Research, 1990
- Physical aspects of comminution and new formulation of a law of comminutionPowder Technology, 1973