Effect of particle shape and roughness on the hydrophobicity of low-rank coal surface
Authors:
- 15 January 2018
- journal article
- research article
- Published by Taylor & Francis in International Journal of Coal Preparation and Utilization
- Vol. 40 (12) , 876-891
Abstract
In this paper, a relationship between the roundness, roughness and induction time of low-rank coal particles was investigated. With the increase of grind time from 1 to 5 minutes, the roundness of low-rank coal particles slightly increased. The results of induction time measurements indicated that the particle surface roughness played a significant role in the surface hydrophobicity of low-rank coal particles. Moreover, it was also found that the roundness and roughness of low-rank coal particle surfaces presented a certain degree of change after both grinding and abrasion processes. Contrary to roundness change, during the grinding process, the roughness of low-rank coal particles significantly decreased. It was also observed that the roundnesses of low-rank coal samples after the grinding process significantly increased with the increase of abrading time. However, unlike the roundness increase with the abrading time increase, the roughness of low-rank coal samples significantly decreased. Therefore, the induction times of low-rank coal samples showed an increased trend after the grinding and abrading processes, which may be attributed to the difficult rupture of wetting film on the smooth solid surface. The grinding and abrading processes may result in a further decrease in surface hydrophobicity and adversely impact on the flotation performance of low-rank coal.Keywords
This publication has 50 references indexed in Scilit:
- The effect of breakage mechanism on the mineral liberation properties of sulphide oresMinerals Engineering, 2010
- Wetting films in attachment of the colliding bubbleAdvances in Colloid and Interface Science, 2007
- Correlation of the surface roughness of some industrial minerals with their wettability parametersChemical Engineering and Processing - Process Intensification, 2005
- Role of shape properties of calcite and barite particles on apparent hydrophobicityChemical Engineering and Processing - Process Intensification, 2004
- Effectiveness of the dense medium and the froth flotation methods in cleaning some Turkish lignitesEnergy Conversion and Management, 2003
- Determination of the shape, morphological and wettability properties of quartz and their correlationsMinerals Engineering, 2003
- Investigation of agglomeration rates of two Turkish lignitesEnergy Conversion and Management, 2003
- A new flotation scheme for a difficult-to-float coal using pitch additive in dry grindingFuel, 2000
- Effect of roughness as determined by atomic force microscopy on the wetting properties of PTFE thin filmsPolymer Engineering & Science, 1996
- ESCA investigations on Schleenhain lignite lithotypes and the hydrogenation residuesFuel, 1992