Semiempirical, Analytical, and Computational Predictions of Dynamic Modulus of Asphalt Concrete Mixtures
Authors:
- 1 January 2010
- journal article
- Published by SAGE Publications in Transportation Research Record: Journal of the Transportation Research Board
- Vol. 2181 (1) , 19-27
Abstract
Dynamic modulus is the key property used to characterize stiffness of asphaltic mixtures in pavement performance evaluation programs such as the Guide for Mechanistic–Empirical Design of New and Rehabilitated Pavement Structures. This paper investigates various models for predicting the dynamic modulus of asphalt mixtures and compares model predictions with experimental test results. The predictions of two semi-empirical models (Witczak's model, modified Hirsch model), an analytical micromechanics model (Hashin's model), and the computational micromechanics model are compared with the dynamic modulus test results obtained from cylindrical asphalt concrete specimens. For the computational micromechanics approach, the finite element method was incorporated with laboratory tests that characterize the properties of individual mixture constituents and with a digital image analysis technique to represent detailed microstructure characteristics of asphalt concrete mixtures. All predicting models investigated in this paper are in fair agreement with the test results. Witczak's equation simulates dynamic moduli somewhat greater than laboratory test results, whereas the modified Hirsch model generally underpredicts moduli. The computational micromechanics model presents a relatively higher deviation at lower loading frequencies, but it shows better predictions because the loading frequency is higher. Hashin's analytical micromechanics model is limited to accurately predicting the dynamic modulus of the asphalt mixtures because of geometric simplifications and assumptions. With further improvements, the computational micromechanics method incorporated with the testing protocol seems attractive, because it can directly account for geometric complexity due to aggregates and inelastic mixture component properties with fewer of the required laboratory tests.Keywords
This publication has 23 references indexed in Scilit:
- Dynamic Modulus Prediction of HMA Mixtures Based on the Viscoelastic Micromechanical ModelJournal of Materials in Civil Engineering, 2008
- Dynamic modulus simulation of the asphalt concrete using the X-ray computed tomography imagesMaterials and Structures, 2008
- Micromechanical finite element framework for predicting viscoelastic properties of asphalt mixturesMaterials and Structures, 2007
- Analytical Modeling of Three-Layered HMA MixturesInternational Journal of Geomechanics, 2007
- Modelling asphalt mastic stiffness using discrete element analysis and micromechanics-based modelsInternational Journal of Pavement Engineering, 2005
- Linear Viscoelastic Analysis of Asphalt MasticsJournal of Materials in Civil Engineering, 2004
- Investigation of Nanomechanical Properties of the Interphase in a Glass Fiber Reinforced Polyester Composite Using NanoindentationJournal of Engineering Materials and Technology, 2003
- Modeling and Experimental Measurements of Strain Distribution in Asphalt MixesJournal of Transportation Engineering, 2001
- Viscoelastic properties of heterogeneous mediaJournal of the Mechanics and Physics of Solids, 1969
- Viscoelastic Behavior of Heterogeneous MediaJournal of Applied Mechanics, 1965