Seven-bit 700-MS/s Four-Way Time-Interleaved SAR ADC With Partial $V_{\mathrm {cm}}$ -Based Switching

Authors:

Abstract
This brief presents a 7-bit 700-MS/s four-way time-interleaved successive approximation register (SAR) analog-to-digital converter (ADC). A partial Vcm-based switching method is proposed that requires less digital overhead from the SAR controller and achieves better conversion accuracy. Compared with switchback switching, the proposed method can further reduce the common mode variation by 50%. In addition, the impacts of such a reduction on the comparator offset, noise, and input parasitic are theoretically analyzed and verified by simulation. The prototype fabricated in a 65-nm CMOS technology occupies an active area of 0.025 mm². The measurement results at the 700 MS/s sampling rate show that the ADC achieves signal-to-noise-and-distortion ratio of 40 dB at Nyquist input and consumes 2.72 mW from a 1.2 V supply, which results in a Walden FoM of 48 fJ/conversion step.
Funding Information
  • National High-Tech Research and Development Program of China (863 Program) (2013AA014101)
  • Research Grants of the University of Macau (MYRG2015-00088-AMSV)
  • Macau Science and Technology Development Fund (SKL/AMSVLSI/11-Y3/SSW/FST)

This publication has 13 references indexed in Scilit: