Influence of the Aspect Ratio of Sodium Iron Titanate Whiskers on the Mechanical and Tribological Performances of Fluorocarbon Composite Coatings
Open Access
Abstract
Inorganic–organic composite coatings with fluoroethylene vinyl ether (FEVE) resin as polymer matrix and sodium iron titanate (NFTO) whiskers with different aspect ratios as reinforcement filler are prepared by the liquid-phase blending method. The influence of aspect ratio and content of NFTO whiskers on the morphology, and the mechanical and tribological performances, of NFTO-reinforced FEVE composite coatings are investigated. The addition of NFTO whiskers can obviously enhance the mechanical and wear resistance performances of the composite coatings and reduce the friction coefficient. The worn surface and wear debris of the composite coatings are studied with scanning electron microscopy (SEM) to reveal the friction-reducing and wear resistance mechanisms. The composite coating filled with ~10 wt.% NFTO whiskers has the best wear resistance performance, since the monodispersed hard whisker can carry the load applied on the sliding surface and reduce the adhesive wear of the polymer matrix. Among the three types of NFTO whiskers, the whiskers with a medium aspect ratio show the best reinforcement effect since they provide the optimum mechanical support to the polymer matrix and cannot be pulled out from the matrix easily.Keywords
Funding Information
- National Natural Science Foundation of China (No. 51425202, No. 51772150)
- Natural Science Foundation of Jiangsu Province (BK20160093)
This publication has 25 references indexed in Scilit:
- Preparation of transparent fluorocarbon/TiO2-SiO2 composite coating with improved self-cleaning performance and anti-aging propertyApplied Surface Science, 2017
- Influence of filler size on the properties of poly(lactic acid) (PLA)/graphene nanoplatelet (GNP) nanocompositesEuropean Polymer Journal, 2017
- Improvement of adhesion strength and scratch resistance of fluorocarbon thin films by cryogenic treatmentApplied Surface Science, 2014
- Tribological performance of PTFE- and PEEK-based coatings under oil-less compressor conditionsWear, 2012
- Tribological properties of polymer/silica composite coatings for microsystems applicationsTribology International, 2011
- Tribological behavior of PEEK/PTFE composites reinforced with potassium titanate whiskersWear, 2009
- Effects of dispersants on dispersion of carbon nanotubes and properties of fluorocarbon resin nanocompositesJournal of Materials Science, 2008
- Tribological behavior of nanostructured WC particles/polymer coatingsWear, 2007
- The tribological behaviour of glass filled polytetrafluoroethyleneTribology International, 2005
- Progress of fluoropolymers on coating applicationsProgress in Organic Coatings, 2000