New epoxy/silica‐titania hybrid materials prepared by the sol–gel process
Authors:
- 25 April 2006
- journal article
- research article
- Published by Wiley in Journal of Applied Polymer Science
- Vol. 101 (2) , 1075-1081
Abstract
A new type of inorganic‐polymer hybrid materials of epoxy/silica‐titania had been prepared by incorporating grafted epoxy, which had been synthesized by epoxy and tetraethoxysilane (TEOS), with highly reactive TEOS and tetrabutyltitanate (TBT) by using the in situ sol–gel process. The grafted epoxy was confirmed by Fourier transform infrared spectroscopy (FT‐IR) and 1H‐NMR spectroscopic technique. Results of FT‐IR spectroscopy and atomic force microscopy (AFM) demonstrated that epoxy chains have been covalently bonded to the surface of the SiO2‐TiO2 particles. The particles size of SiO2‐TiO2 are about 20–50 nm, as characterized by AFM. The experimental results showed that the glass‐transition temperatures and the modulus of the modified systems were higher than that of the unmodified system, and the impact strength was enhanced by two to three times compared with that of the neat epoxy. The morphological structure of impact fracture surface and the surface of the hybrid materials were observed by scanning electron microscopy and AFM, respectively. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 101: 1075–1081, 2006Keywords
This publication has 16 references indexed in Scilit:
- Tensile performance improvement of low nanoparticles filled-polypropylene compositesComposites Science and Technology, 2002
- Synthesis of Organic−Inorganic Polymer Hybrids Having Interpenetrating Polymer Network Structure by Formation of Ruthenium−Bipyridyl ComplexMacromolecules, 2001
- Preparation and characterization of epoxy composites filled with functionalized nanosilica particles obtained via sol–gel processPolymer, 2001
- Polymer/layered silicate nanocomposites as high performance ablative materialsApplied Clay Science, 1999
- Synthesis of organic/inorganic nanocomposites protonic conducting membrane through sol-gel processesSolid State Ionics, 1999
- The effects of interactions on the properties of acrylic polymers/silica hybrid materials prepared by the in situ sol-gel processPolymer, 1997
- Poly(vinyl acetate)/silica-filled materials: material properties of in situ vs fumed silica particlesMacromolecules, 1993
- Mechanical properties of nylon 6-clay hybridJournal of Materials Research, 1993
- Morphology and Dynamic Mechanical Behavior of Rubber-Toughened Epoxy Resins1984
- Stress‐strain behavior of styrene‐acrylonitrile/glass bead composites in the glassy regionPolymer Engineering & Science, 1971