Performances of falling film evaporators
Authors:
- 1 February 1991
- journal article
- research article
- Published by Cambridge University Press (CUP) in Journal of Dairy Research
- Vol. 58 (1) , 29-38
Abstract
The performances of falling film evaporators used in the New Zealand dairy industry for concentrating skim milk, whole milk and buttermilk were evaluated by determining (1) the kg steam used per kg water evaporated, and (2) the heat transfer coefficient of each pass in the evaporators. A computer program was used to calculate the results. The heat transfer coefficients varied from 0·3 to 3·2 kW/m2 per °C and the steam consumption from 0·4 to 0·09 kg steam/kg evaporation. The viscosity of the feed and the momentum of the vapours passing down the tubes were found to be the main factors controlling the heat transfer coefficient. A correlation between the heat transfer coefficient and these factors is presented. Other factors likely to have an influence on the performance are discussed.Keywords
This publication has 6 references indexed in Scilit:
- Performances of falling film evaporatorsJournal of Dairy Research, 1991
- Modelling of multiple-effect falling-film evaporatorsInternational Journal of Food Science and Technology, 1983
- Kinematic viscosities of New Zealand skim-milkJournal of Dairy Research, 1978
- Falling film evaporators — A design equation for heat transfer ratesThe Canadian Journal of Chemical Engineering, 1977
- Forced convection condensation in the presence of noncondensables and interfacial resistanceInternational Journal of Heat and Mass Transfer, 1967
- Condensation heat transfer in the presence of noncondensables, interfacial resistance, superheating, variable properties, and diffusionInternational Journal of Heat and Mass Transfer, 1966