Artificial Thermal Quenching and Salt Crystallization Weathering Processes for the Assessment of Long-Term Degradation Characteristics of Some Sedimentary Rocks, Egypt
Open Access
Abstract
This research aims at investigating the deterioration of limestone rocks due to the influences of thermal quenching and salt crystallization weathering tests and predicting their long-term durability. Therefore, six types of limestones were quarried from different provinces of Egypt and subjected to 50 cycles of thermal quenching and 25 cycles of salt crystallization weathering processes. The porosity, Schmidt hammer rebound hardness, ultrasound pulse velocity, Brazilian tensile strength, and uniaxial compression strength were determined before and after weathering processes. In addition, the mathematical decay function model was developed to evaluate the degradation rate of samples against weathering processes. Results proved that the cyclic salt crystallization deteriorates the physico-mechanical characteristics of the studied limestone more strongly than the thermal quenching cycles do. The decay constant and half-life indexes obtained here indicate that the degradation rate differs for various limestone specimens under thermal and salt weathering processes. This model also showed that the deterioration rate of the studied rocks was higher during cyclic salt crystallization in comparison with thermal quenching. Therefore, the rock degradation rate and or long-term durability under cyclic thermal and salt processes can be estimated accurately. These results show that the studied limestones can be used as building stones in regions exposed to frequent cyclic thermal and salty weathering conditions for long periods without degradation. However, partial attention should be given to LSG limestone rocks characterized by increased porosity and water absorption characteristics.Keywords
Funding Information
- Research Group Program (RGP. 2/19/43)
This publication has 59 references indexed in Scilit:
- Predicting the long-term durability of building stones against freeze–thaw using a decay function modelCold Regions Science and Technology, 2013
- Effect of freeze–thaw and thermal shock weathering on the physical and mechanical properties of an andesite stoneBulletin of Engineering Geology and the Environment, 2010
- Evaluation of the long-term durability of yellow travertine using accelerated weathering testsBulletin of Engineering Geology and the Environment, 2010
- A comparative study on indirect determination of degree of weathering of granites from some physical and strength parameters by two soft computing techniquesMaterials Characterization, 2009
- Stone properties and weathering induced by salt crystallization of Maltese Globigerina LimestoneGeological Society, London, Special Publications, 2007
- A Laboratory Investigation of the Effects of Cyclic Heating and Cooling, Wetting and Drying, and Freezing and Thawing on the Compressive Strength of Selected SandstonesEnvironmental & Engineering Geoscience, 2003
- Thermodynamic modelling of changes induced by salt pressure crystallisation in porous media of stoneJournal of Crystal Growth, 1999
- Applied Multivariate Statistical Analysis.1998
- Salt crystallization in porous construction materials I Estimation of crystallization pressureJournal of Crystal Growth, 1997
- Building stone: the geological dimensionQuarterly Journal of Engineering Geology, 1993