Investigation on the Voltage Hysteresis of Mn3O4 for Lithium-Ion Battery Applications
Authors:
- 28 December 2020
- journal article
- research article
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 13 (1) , 570-579
Abstract
In lithium-ion batteries (LIBs), conversion-based electrodes such as transition-metal oxides and sulfides exhibit promising characteristics including high capacity and long cycle life. However, the main challenge for conversion electrodes to be industrialized remains on voltage hysteresis. In this study, Mn3O4 powder was used as an anode material for LIBs to investigate the root cause of the hysteresis. First, the electrochemical reaction paths were found to be dominated by Mn/Mn2+ redox couple after the first lithiation from galvanostatic charging/discharging (GCD) and cyclic voltammetry (CV) measurements. Then, the voltage hysteresis was proposed to be composed of reaction overpotential (∼0.373 V) and intrinsic overpotential (∼0.377 V), which were related to the diffusion behaviors according to CV, galvanostatic intermittent titration technique (GITT), and electrochemical impedance spectroscopy (EIS) analyses. Furthermore, results revealed that the formation of disparate phase distribution during lithiation and delithiation could be the root cause of the intrinsic overpotential of Mn3O4. These results were based on ultrahigh-resolution transmission electron microscopy (UHRTEM) and molecular dynamics (MD) simulation. It was expected that improving the diffusion behaviors of the systems could eliminate the voltage hysteresis of Mn3O4. In summary, this paper provides an explicit insight into the hysteresis for conversion-based Mn3O4 that could also be applied to other oxide systems and very crucial to reduce energy loss for commercializing oxides as anode materials in LIBs.Keywords
Funding Information
- Ministry of Science and Technology, Taiwan (105-2221-E-007-041-MY3, 108-2221-E-007-051-MY3)
This publication has 47 references indexed in Scilit:
- Thermodynamics and Kinetics of the Li/FeF3 Reaction by Electrochemical AnalysisThe Journal of Physical Chemistry C, 2012
- Spongelike Nanosized Mn3O4 as a High-Capacity Anode Material for Rechargeable Lithium BatteriesChemistry of Materials, 2011
- Evaluation of Lithium-Ion Battery Equivalent Circuit Models for State of Charge Estimation by an Experimental ApproachEnergies, 2011
- An atomistic simulation of site preference and vibrational properties of UMxAl12−x (M=Fe, Co, Ni, Cr and Mn) and UMxAl12−xHxProgress in Natural Science: Materials International, 2009
- A New Self-Consistent Empirical Interatomic Potential Model for Oxides, Silicates, and Silica-Based GlassesThe Journal of Physical Chemistry B, 2006
- Electrochemical impedance study of lithium intercalation into MCMB electrode in a gel electrolyteElectrochimica Acta, 2004
- Rechargeable lithium battery based on pyrolytic carbon as a negative electrodeJournal of Power Sources, 1989
- A rechargeable Li/LixCoO2 CellJournal of Power Sources, 1987
- Lithium Intercalation Cells Without Metallic Lithium: andJournal of the Electrochemical Society, 1987
- LixCoO2 (0<x<-1): A new cathode material for batteries of high energy densityMaterials Research Bulletin, 1980