Comparative Failure Assessment of Single and Double Lap Joints with Varying Adhesive Systems
- 18 November 2015
- journal article
- research article
- Published by Taylor & Francis in The Journal of Adhesion
- Vol. 92 (7-9) , 610-634
Abstract
Joining by adhesively bonded methods is being increasingly used in the design of mechanical structures, because of the significant benefits of this technique compared to the traditional ones. Commercial adhesives range from strong and brittle (e.g., Araldite® AV138) to less strong and ductile (e.g., Araldite® 2015). A new family of polyurethane adhesives combines high strength and ductility (e.g., Sikaforce® 7888). This work compares the tensile performance of the three aforementioned adhesive systems in single and double lap aluminum joints with varying values of overlap length (LO). A cohesive zone modeling (CZM) numerical analysis was carried out to analyze through-thickness normal and shear stresses in the adhesive layer, to study the CZM damage variable and to predict the joint strength. A comparison was also performed with simple analytical models. The stress and damage variable analyses helped in understanding the differences between adhesives in which pertains to the failure process and joint strength. The proposed work also enabled concluding that the CZM predictions are typically accurate, and which family of adhesives is more suited for each joint configuration, with clear advantage for the Sikaforce® 7888. As a result of this work, design guidelines were proposed for adhesively bonded joints.Keywords
This publication has 33 references indexed in Scilit:
- Fracture toughness determination of adhesive and co-cured joints in natural fibre compositesComposites Part B: Engineering, 2013
- Single lap joints loaded in tension with ductile steel adherendsInternational Journal of Adhesion and Adhesives, 2013
- Modelling of Single-Lap Joints Using Cohesive Zone Models: Effect of the Cohesive Parameters on the Output of the SimulationsThe Journal of Adhesion, 2012
- Experimental and numerical analysis of single-lap joints for the automotive industryInternational Journal of Adhesion and Adhesives, 2009
- Numerical analysis of edge effects in adhesively-bonded assemblies application to the determination of the adhesive behaviourComputers & Structures, 2008
- Computational Modelling of the Residual Strength of Repaired Composite Laminates Using a Cohesive Damage ModelJournal of Adhesion Science and Technology, 2008
- Bond Parameters to Improve Tensile Load Bearing Capacities of Co-Cured Single and Double Lap Joints with Steel and Carbon Fiber-epoxy Composite AdherendsJournal of Composite Materials, 2003
- On the evaluation of wedge corner stress intensity factors of bi-material joints with surface tractionsComputers & Structures, 2001
- Strength of Joints Involving CompositesThe Journal of Adhesion, 1996
- Stress analysis of adhesive-bonded lap jointsJournal of Strain Analysis, 1974