Development of a wear coefficient equation for the A A7075-B4C composite – steel interface
Open Access
- 1 June 2024
- journal article
- research article
- Published by IOP Publishing in Materials Research Express
- Vol. 11 (6) , 066517
Abstract
In this research, an attempt was made to develop a wear equation for specific wear regimes that differs with temperature, sliding velocity, applied load, and sliding distance. The experimental runs were designed with the L25 Taguchi orthogonal array, and the uniform dispersion of reinforcement was confirmed using a scanning electron microscope. The presence of reinforcement hinders dislocation movement led to an augmentation in the composites’ hardness, while an elevation in temperature resulted in a decline in hardness due to the reduction of Pierls stresses. Owing to the formation of a Mechanical Mixed Layer (MML), the wear rate decreases with addition of volume fraction of B4C particles until 7.5%, beyond this MML break down and wear rate transit from mild to severe due to the direct metal contact. At 50 °C, the wear mode was abrasive and delamination; at 150 °C, it was abrasive plastic deformation; and at 250 °C, it was plastic flow of materials. Grooves, micro pits, micro cracks, ploughing and resolidified material were the distinct feature observed on the worn surface morphology. The modified wear equation was developed by incorporating reinforcement effect, specific wear regimes, temperature-dependent factors, and functional parameters.Keywords
This publication has 24 references indexed in Scilit:
- Studies on the Mechanical Properties and Wear Behavior of an AZ91D Magnesium Metal Matrix Composite Utilizing the Stir Casting MethodMetallography, Microstructure, and Analysis, 2023
- A high temperature wear-resistant Ni-based alloy coating for coppery blast furnace tuyere applicationSurface and Coatings Technology, 2023
- Effect of thermal expansion on the high temperature wear resistance of Ni-20%Cr detonation spray coating on IN718 substrateSurface and Coatings Technology, 2023
- Machine learning models of the transition from solid to liquid lubricated friction and wear in aluminum-graphite compositesTribology International, 2022
- Adhesive Wear Regimes on Rough Surfaces and Interaction of Micro-contactsTribology Letters, 2021
- Recent developments in the manufacturing technologies of composite components and their cost-effectiveness in the automotive industry: A review studyComposite Structures, 2021
- Microstructure and mechanical properties of SiCnp/Al6082 aluminum matrix composites prepared by squeeze casting combined with stir castingJournal of Materials Processing Technology, 2020
- High temperature wear behavior of Al2219/n-B4C/MoS2 hybrid metal matrix compositesComposites Communications, 2020
- Formation of lubricated tribo layer, grain boundary precipitates, and white spots on titanium-coated graphite–reinforced hybrid compositesJournal of the Australian Ceramic Society, 2018
- Influence of titanium-coated (B4Cp + SiCp) particles on sulphide stress corrosion and wear behaviour of AA7050 hybrid composites (for MLG link)Journal of the Australian Ceramic Society, 2017