Surface alloy depletion and martensite formation during glass to metal joining of austenitic stainless steels
Authors:
- 1 May 2012
- journal article
- Published by SAGE Publications in Science and Technology of Welding and Joining
- Vol. 17 (4) , 321-332
Abstract
Preoxidised and glass to metal (GtM) sealed austenitic stainless steels displayed a ferritic (bcc) layer near the metal/oxide interface, as determined by electron backscatter diffraction and X-ray diffraction. Through electron probe microanalysis, it was determined that this layer was depleted of alloying elements due to the oxidation and sealing processes. Characterisation of the layer morphology suggested that it formed through the martensite transformation mechanism. Thermochemical modelling with ThermoCalc also supported a martensitic transformation as opposed to diffusional ferrite formation. The composition gradient through the layer was correlated to the Eichelman and Hull empirical relationship for martensite start ( Ms) temperatures. Because of Cr, Mn and Si depletion during preoxidation and glass sealing, Ms temperatures near ambient are possible in this surface region. The martensite layer was non-uniform, however, with laths extending deeper into the alloy due to stabilised growth in the material above its Ms temperature. This behaviour was characterised by image analysis techniques and discussed in terms of martensite stability and microstructural effects. Possible negative aspects of bcc phase formation on GtM seal properties are discussed, and analyses of alternative alloys 21-6-9 (tradename Nitronic 40; Armco Holding Corp., West Chester, OH, USA) and 22-13-5 (Nitronic 50) showed reduction or elimination of martensite after GtM joining.Keywords
This publication has 16 references indexed in Scilit:
- The Role of Silicon in the Reactive-Elements Effect on the Oxidation of Conventional Austenitic Stainless SteelOxidation of Metals, 2007
- The Effects of 304L Stainless Steel Pre-Oxidation on Bonding to Alkali Barium Silicate Glass2006
- Influence of Chromium Additions on the Oxidation Resistance of an Austenitic Fe–30Mn–5Al AlloyOxidation of Metals, 2002
- High-Temperature Oxidation Studies of Low-Nickel Austenitic Stainless Steel. Part I: Isothermal OxidationOxidation of Metals, 2001
- Preparation, properties and chemistry of glass- and glass-ceramic-to-metal seals and coatingsJournal of Materials Science, 1993
- Formation and growth morphology of oxidation-induced ferrite layer in Fe-Mn-Al-Cr-C alloysJournal of Materials Science, 1990
- Spallation of oxide scales from 20%Cr25%NiNb stainless steelMaterials Science and Engineering: A, 1989
- Microstructural development during solidification of stainless steel alloysMetallurgical Transactions A, 1989
- Microstructural development in the oxidation-induced phase transformation of Fe-Al-Cr-Mn-C alloysJournal of Materials Science, 1988
- Analytical electron microscopy of a selective oxide scale formed on 20% Cr-25% Ni-Nb stainless steelOxidation of Metals, 1984