Dynamic Gear Loads Due to Coupled Lateral, Torsional and Axial Vibrations in a Helical Geared System
Authors:
- 1 April 1999
- journal article
- Published by ASME International in Journal of Vibration and Acoustics
- Vol. 121 (2) , 141-148
Abstract
In this paper we investigate the rotordynamics of a geared system with coupled lateral, torsional and axial vibrations, with a view toward understanding the severe vibration problems that occurred on a 28-MW turboset consisting of steam turbine, double helical gear and generator. The new dynamic model of the shaft line was based on the most accurate simulation of the static shaft lines, which are influenced by variable steam forces and load-dependent gear forces. The gear forces determine the static shaft position in the bearing shell. Each speed and load condition results in a new static bending line which defines the boundary condition for the dynamic vibration calculation of the coupled lateral, torsional and axial systems. Rigid disks and distributed springs were used for shaft line modeling. The tooth contact was modeled by distributed springs acting normally on the flank surfaces of both helices. A finite element method with distributed mass was used for lateral and torsional vibrations. It was coupled to a lumped mass model describing the axial vibrations. The forced vibrations due to unbalances and static transmission errors were calculated. The eigenvalue problem was solved by means of a stability analysis showing the special behavior of the coupled system examined. The calculation was successfully applied, and the source of the vibration problem could be located as being a gear-related transmission error. Several redesign proposals lead to a reliable and satisfactory vibrational behavior of the turboset.Keywords
This publication has 14 references indexed in Scilit:
- Dynamic force transmissibility in helical gear pairsMechanism and Machine Theory, 1995
- Analysis of Vibration Characteristics for a Rotor‐Bearing System Using Distributed Spring and Damper ModelInternational Journal of Rotating Machinery, 1995
- Dynamic Analysis of a Multi-Mesh Helical Gear TrainJournal of Mechanical Design, 1994
- Finite element formulation of a tapered Timoshenko beam for free lateral vibration analysisJournal of Sound and Vibration, 1992
- Effects of Gear Box Vibration and Mass Imbalance on the Dynamics of Multistage Gear TransmissionJournal of Vibration and Acoustics, 1991
- Operating Conditions of Multi-Lobe Journal Bearings Under High Thermal LoadsJournal of Tribology, 1990
- On Dynamic Gear Tooth Loading Due to Coupled Torsional-Lateral Vibrations in a Geared Rotor-Hydrodynamic Bearing SystemJournal of Tribology, 1989
- Whirl Speeds and Unbalance Response of Multibearing Rotors Using Finite ElementsJournal of Vibration and Acoustics, 1984
- Coupled Torsional-flexural Vibration of a Shaft in a Geared System of Rotors : 1st ReportBulletin of JSME, 1980
- A Study on the Unstable Vibration Phenomena of a Reduction Gear System, Including the Lightly Loaded Journal Bearings, for a Marine Steam TurbineBulletin of JSME, 1979