Deformation and fracture behavior of polypropylene–ethylene vinyl alcohol blends compatibilized with ionomer Zn2+
- 12 August 2005
- journal article
- research article
- Published by Wiley in Journal of Applied Polymer Science
- Vol. 98 (3) , 1271-1279
Abstract
This work investigated the deformation and fracture behavior of polypropylene–ethylene vinyl alcohol (PP/EVOH) blends compatibilized with ionomer Zn2+. Uniaxial tensile tests and quasistatic fracture experiments were performed for neat PP and for 10 and 20 wt % EVOH blends with different ionomer contents. The addition of EVOH copolymer to PP led to an increase in the Young's modulus whereas the yield strength was decreased with the EVOH content as a consequence of the higher stiffness of EVOH and the poor interfacial adhesion between PP and EVOH, respectively. Furthermore, the incorporation of EVOH into PP promoted stable crack growth. Neat PP displayed nonlinear load‐displacement behavior with some amount of slow crack growth preceding unstable brittle fracture, whereas most PP/EVOH blends exhibited “pseudostable” fracture characterized by slow crack growth that could not be externally controlled. All blends exhibited lower resistance to crack initiation than PP but the fracture propagation resistance was significantly improved. For 10 wt % EVOH blends, the resistance to crack initiation was roughly constant with the ionomer content up to 5%, then it increased with the further addition of compatibilizer. Conversely, for 20 wt % EVOH blends, the resistance to crack initiation appeared to be independent of the ionomer content. The better resistance to crack initiation exhibited by the 10 wt % EVOH blends could be attributed to a higher level of compatibilization in these blends. By contrast, 20 wt % EVOH blends with ≤2% ionomer content showed completely stable crack growth. In addition, J–R curves and valid plane strain fracture toughness values for these blends could also be determined. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 98: 1271–1279, 2005Keywords
This publication has 20 references indexed in Scilit:
- Load separation principle in determination of J‐R curve for ductile polymers: Suitability of different material deformation functions used in the normalization methodMacromolecular Symposia, 1999
- Polypropylene–rubber blends: 2. The effect of the rubber content on the deformation and impact behaviourPolymer, 1999
- Polypropylene–rubber blends: 4. The effect of the rubber particle size on the fracture behaviour at low and high test speedPolymer, 1999
- Polypropylene–rubber blends: 5. Deformation mechanism during fracturePolymer, 1999
- Polypropylene–rubber blends: 3. The effect of the test speed on the fracture behaviourPolymer, 1999
- Effect of rubber functionality on microstructures and fracture toughness of impact-modified nylon 6,6/polypropylene blends: 1. Structure–property relationshipsPolymer, 1999
- Influence of maleation of polypropylene on the interfacial properties between polypropylene and ethylene-vinyl alcohol copolymerJournal of Applied Polymer Science, 1998
- Compatibilization of poly(ethylene-co-vinyl alcohol) (EVOH) and EVOH-HDPE blends: Structure and propertiesJournal of Applied Polymer Science, 1998
- Morphology, thermomechanical and barrier properties of polypropylene-ethylene vinyl alcohol blendsPolymer, 1998
- The effect of annealing temperature on the fracture performance of isotactic polypropyleneJournal of Materials Science, 1995