A Novel Hyperbranched Polysiloxane Containing Epoxy and Phosphaphenanthrene Groups and its Multi-Functional Modification of Cyanate Ester Resin
- 1 July 2013
- journal article
- research article
- Published by Taylor & Francis in Soft Materials
- Vol. 11 (3) , 346-352
Abstract
A novel hyperbranched polysiloxane containing epoxy and phosphaphenanthrene groups (EP-HPSi) was synthesized through a ring-open reaction between P-H bond of 9,10-dihydro-9-oxa-10-phosphaphenanthrene-10-oxide (DOPO) and epoxy group of a hyperbranched polysiloxane. EP-HPSi was used to modify cyanate ester (CE) resin. The influences of the content of EP-HPSi in modified CE resin system as well as the molar ratio between DOPO and epoxy group on the structure and integrated performance of the EP-HPSi/CE system were systematically studied. Results show that EP-HPSi is a multi-functional flame retardant, which endows CE resin with not only outstanding flame retardancy, but also significantly increased toughness and stiffness. For example, EP-HPSi/CE system has a 40–80oC lower curing temperature than CE; moreover, the impact and flexural strengths of EP-HPSi/CE system are about 1.6–2.2 and 1.3 times higher than that of CE resin, respectively. These attractive integrated performances of EP-HPSi/CE system are attributed to the special structure of EP-HPSi, and its influence on the cross-linked network. This investigation suggests that the method proposed herein is a new approach to develop high performance flame retardant resins for cutting-edge industries, especially those that simultaneously have outstanding thermal resistance, toughness, and stiffness. [Supplementary materials are available for this article. Go to the Publisher's online edition of Soft Materials for the following free supplemental resource: Figure S1]Keywords
This publication has 29 references indexed in Scilit:
- Photochromic Polymer and Hybrid Materials Containing Azo Methylisoxazole DyeSoft Materials, 2011
- Novel hyperbranched polyphenylsilsesquioxane‐modified cyanate ester resins with improved toughness and stiffnessPolymer International, 2011
- Flame retardancy materials based on a novel fully end-capped hyperbranched polysiloxane and bismaleimide/diallylbisphenol A resin with simultaneously improved integrated performanceJournal of Materials Chemistry, 2011
- Solvent effect on the thin film formation of polymeric solar cellsMaterials Letters, 2009
- Thermal, physical and flame-retardant properties of phosphorus-containing epoxy cured with cyanate esterReactive and Functional Polymers, 2009
- Quantitative shear wave magnetic resonance elastography: Comparison to a dynamic shear material testMagnetic Resonance in Medicine, 2005
- Mechanical properties of intercalated cyanate ester–layered silicate nanocompositesPolymer, 2003
- Preparation of silicon‐/phosphorous‐containing epoxy resins from the fusion process to bring a synergistic effect on improving the resins' thermal stability and flame retardancyJournal of Applied Polymer Science, 2002
- Flammability and thermal stability studies of polymer layered-silicate (clay) nanocompositesApplied Clay Science, 1999
- Effect of the addition of aramid-silicone block copolymer on phase structure and toughness of cured epoxy resins modified with siliconePolymer, 1998