Lessons learned after three years of SPIDER operation and the first MITICA integrated tests
Authors:
Preprint
Abstract
ITER envisages the use of two heating neutral beam injectors plus an optional one as part of the auxiliary heating and current drive system. The 16.5 MW expected neutral beam power per injector is several notches higher than worldwide existing facilities. A Neutral Beam Test Facility (NBTF) was established at Consorzio RFX, exploiting the synergy of two test beds, SPIDER and MITICA. SPIDER is dedicated to developing and characterizing large efficient negative ion sources at relevant parameters in ITER-like conditions: source and accelerator located in the same vacuum where the beam propagates, immunity to electromagnetic interferences of multiple radio-frequency (RF) antennas, avoidance of RF-induced discharges on the outside of the source. Three years of experiments on SPIDER have addressed to the necessary design modifications to enable full performances. The source is presently under a long shut-down phase to incorporate learnings from the experimental campaign. Parallelly, developments on MITICA, the full-scale prototype of the ITER NBI featuring a 1 MV accelerator and ion neutralization, are underway including manufacturing of in-vessel components, while power supplies and auxiliary plants are already under final testing and commissioning. Integration, commissioning and tests of the 1MV power supplies are essential for this first-of-kind system, unparalleled both in research and industry field. The integrated test to confirm 1MV output by combining invertor systems, DC generators and transmission lines extracted errors/accidents in some components. To realize a concrete system for ITER, solutions for the repair and the improvement of the system were developed. Hence, NBTF is emerging as a necessary facility, due to the large gap with existing injectors, effectively dedicated to identify issues and find solutions to enable successful ITER NBI operations in a time bound fashion.Keywords
All Related Versions
- Version 1, 2023-04-04, ArXiv
- Published version: Fusion Engineering and Design, 191.
This publication has 16 references indexed in Scilit:
- Integration of new sets of magnets for improved plasma confinement in the SPIDER experimentFusion Engineering and Design, 2023
- Influence of plasma grid-masking on the results of early SPIDER operationFusion Engineering and Design, 2023
- As built design, commissioning and integration of the SPIDER and NBTF central safety systemsFusion Engineering and Design, 2023
- 2D simulations of inductive RF heating in the drivers of the SPIDER deviceFusion Engineering and Design, 2023
- Power supply system for large negative ion sources: Early operation experience on the SPIDER experimentFusion Engineering and Design, 2021
- Robustness of ZAO based NEG pump solutions for fusion applicationsFusion Engineering and Design, 2021
- Investigation on stable operational regions for SPIDER RF oscillatorsFusion Engineering and Design, 2019
- Characterization of ZAO® sintered getter material for use in fusion applicationsFusion Engineering and Design, 2019
- Solid state generator for powerful radio frequency ion sources in neutral beam injection systemsFusion Engineering and Design, 2015
- RF-Plasma Source Commissioning in Indian Negative Ion FacilityAIP Conference Proceedings, 2011