Optimum Conditions of Body Effect Factor and Substrate Bias in Variable Threshold Voltage MOSFETs

Authors:

Abstract
The effects of body effect factor (γ) and substrate bias (V bs) in a variable threshold voltage metal oxide semiconductor field effect transistor (VTMOS) have been systematically examined by device simulation. The characteristics of a VTMOS are significantly affected by the value of γ and the V bs difference (ΔV bs) between the active mode and the standby mode. Optimal γ and ΔV bs to obtain higher on-current in the active mode and lower off-current in the standby mode are derived. When off-current in the active mode is limited, a larger ΔV bs and smaller γ are preferable to obtain a higher drive current. When γ is fixed, |ΔV bs| should be as large as the breakdown and leakage current permits. When ΔV bs is fixed for some reason, such as breakdown, the optimum γ depends on the relationship between ΔV bs and V dd: γ should be larger when a large |ΔV bs| can be applied, while it should be smaller when the |ΔV bs| is small. The scalability of VTMOS is also discussed and it is found that channel engineering is strongly required in a scaled VTMOS. These results will greatly help in designing ultra-low power VTMOS VLSIs, and the VTMOS could be expected to survive in the 50 nm generation depending on the scaling scenario and applications.

This publication has 6 references indexed in Scilit: