High-Efficiency Power Amplifier Using an Active Second-Harmonic Injection Technique Under Optimized Third-Harmonic Termination
Authors:
- Mincheol SeoMSMincheol Seo
- Hwiseob LeeHLHwiseob Lee
- Jehyeon GuJGJehyeon Gu
- Hyungchul KimHKHyungchul Kim
- Junghyun HamJHJunghyun Ham
- Wooyeol ChoiWCWooyeol Choi
- Yanghun YunYYYanghun Yun
- Kenneth K. OKOKenneth K. O
- Youngoo YangYYYoungoo Yang
- 29 May 2014
- journal article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Circuits and Systems II: Express Briefs
- Vol. 61 (8) , 549-553
Abstract
This brief presents an active second-harmonic injection technique to improve the efficiency and bandwidth for high-efficiency power amplifiers (PAs). An optimum third-harmonic termination condition was examined for higher efficiency after the second-harmonic injection using a multiharmonic load-pull simulation. It was determined that the optimum third-harmonic termination is the same as that of the inverse class-F PA. Based on this result, a high-efficiency PA with an optimized third-harmonic termination for the second-harmonic injection was designed for a center frequency of 1 GHz as a main amplifier. The overall system requires an auxiliary second-harmonic amplifier and a diplexer between the main and auxiliary PAs. The PA with an optimized third-harmonic termination for the second-harmonic injection was implemented using a 10-W GaN high-electron-mobility transistor for both the main and auxiliary power stages. Compared with the PA without second-harmonic injection, the bandwidth with a power-added efficiency of more than 80% is extended from 60 (960-1020 MHz) to 180 MHz (880-1060 MHz) after the second-harmonic injection.Keywords
Funding Information
- National Research Foundation of Korea (2012-003485)
- Cobham/Defense Advanced Research Projects Agency Microscale Power Conversion Program
This publication has 8 references indexed in Scilit:
- Resistive Second-Harmonic Impedance Continuous Class-F Power Amplifier With Over One Octave Bandwidth for Cognitive RadiosIEEE Journal on Emerging and Selected Topics in Circuits and Systems, 2013
- A 3.1-GHz Class-F Power Amplifier With 82% Power-Added-EfficiencyIEEE Microwave and Wireless Components Letters, 2013
- Highly Efficient Saturated Power AmplifierIEEE Microwave Magazine, 2012
- Broadband GaN switch mode class E power amplifier for UHF applications2009
- Designing, Fabrication and Characterization of Power Amplifiers Based on 10-Watt SiC MESFET & GaN HEMT at Microwave Frequencies2008
- Concurrent Dual-Band Class-F Load Coupling Network for Applications at 1.7 and 2.14 GHzIEEE Transactions on Circuits and Systems II: Express Briefs, 2008
- L-band LDMOS power amplifiers based on an inverse class-F architectureIEEE Transactions on Microwave Theory and Techniques, 2005
- Class-F power amplifiers with maximally flat waveformsIEEE Transactions on Microwave Theory and Techniques, 1997