Design and development of a horizontal contact separated (HCS) test setup for measuring the performance of triboelectric nanogenerator for sustainable energy harvesting applications
- 1 March 2024
- journal article
- research article
- Published by AIP Publishing in Review of Scientific Instruments
- Vol. 95 (3)
Abstract
Triboelectric nanogenerators (TENGs) can play a pivotal role in harnessing non-utilized reciprocating motion and convert it into electrical energy that can later be stored in a battery or capacitor to power various Internet of Things-based smart electronic and wearable devices. Herein, we designed a cost-effective instrumental test bed focused on investigating the output performance of a horizontal contact separation mode triboelectric nanogenerator by varying the input parameters, such as applied force, motor speed, triboplate separation, and frequency of instrumental setup. The test bed mainly consists of three major parts: (i) application of force, (ii) tapping of TENG sample, and (iii) output parameters measurement. The output performance in terms of open circuit output voltage (VOC), short circuit current (ISC), and power density of polydimethylsiloxane-based TENG was monitored and optimized by varying the input parameters. A low-cost current measuring circuitry using an operational amplifier integrated circuit has been proposed with 92% accuracy. The maximum value of VOC and ISC was observed to be 254 V and 31.8 µA at a motor speed of 600 rpm, the distance between both the plates was 6 mm, the input applied force of 40 N, and the striking frequency of 3 Hz. The maximum power density of 2.1 W/m2 was obtained at an input impedance of 8 kΩ. The durability of the test bed as well as the TENG sample was also measured for 25 h. The degree of uncertainty was measured for VOC, ISC, and applied force and calculated to be 1.62%, 7.45%, and 6.27%, respectively.Keywords
Funding Information
- DST-SERB (SRG-(2019/001984)])
- Indian Institute of Technology Delhi (FIRP)
- Indian Institute of Technology Delhi (MFIRP)
This publication has 38 references indexed in Scilit:
- An internal electrode strategy for enhancing the stability and durability of triboelectric nanogeneratorComposites Science and Technology, 2023
- Effect of Fe3O4 nanoparticles on anaerobic digestion of municipal wastewater sludgeBiomass and Bioenergy, 2022
- Hybrid Piezoelectric and Triboelectric Nanogenerators for Energy Harvesting and Walking SensingEnergy Technology, 2022
- Fabric‐Assisted MXene/Silicone Nanocomposite‐Based Triboelectric Nanogenerators for Self‐Powered Sensors and Wearable ElectronicsAdvanced Functional Materials, 2021
- Piezoelectric Nanogenerators Derived Self‐Powered Sensors for Multifunctional Applications and Artificial IntelligenceAdvanced Functional Materials, 2021
- Coupling of piezo- and pyro-electric effects in miniature thermal energy harvestersApplied Energy, 2020
- Self‐Powered Gyroscope Ball Using a Triboelectric MechanismAdvanced Energy Materials, 2017
- An Ultrathin Flexible Single‐Electrode Triboelectric‐Nanogenerator for Mechanical Energy Harvesting and Instantaneous Force SensingAdvanced Energy Materials, 2016
- Design and experiment of a human-limb driven, frequency up-converted electromagnetic energy harvesterEnergy Conversion and Management, 2015
- Kinetic Energy Harvesting2010