Robust Bi2(Te,Se)3 Thermoelectrics From Large Shrinkage Ratio Extrusion Drives Advanced Peltier Microcooler and Power Generator
Authors:
- 10 March 2025
- journal article
- Published by Wiley in Advanced Functional Materials
- Vol. 35 (32)
Abstract
The “Barrel Effect” of n‐type Bi2Te3 materials have always been the biggest obstacle to expanding thermoelectric commercial applications. This work develops an industrial‐scale large shrinkage ratio extrusion method that synchronously coordinates appropriate texturing and modifies atomic defects, as well as micro and nanostructures, prompting simultaneous gains in rods with a diameter of 30 mm increases to ≈1.20 at 325 kelvin, with flexural and compressive strengths significantly improve to 77.7 and 192.4 MPa, respectively. Successfully fabricated Peltier microcoolers (1 × 3 mm2 cross‐section) exhibit a competitive maximum cooling temperature difference of 90.6 kelvin at a hot‐side temperature of 348 kelvin. A designed and integrated 17‐by‐17 power generator demonstrates a high conversion efficiency of 7% under a 200‐kelvin temperature gradient and highlights operational stability. These achievements hold great potential for advancing applications in compact solid‐state cooling and low‐grade waste heat recovery.Keywords
Funding Information
- National Key Research and Development Program of China (2024YFB3813800)
- China Postdoctoral Science Foundation (2024M753342)
- National Natural Science Foundation of China (U21A2079)
This publication has 49 references indexed in Scilit:
- Gradient Nanotwins and Enhanced Weighted Mobility Synergistically Upgrade Bi0.5Sb1.5Te3 Thermoelectric and Mechanical PerformanceAdvanced Functional Materials, 2024
- Interfacial Design Contributing to High Conversion Efficiency in Mg3(Sb, Bi)2/Bi2Te3 Thermoelectric Module with Superior StabilityAdvanced Energy Materials, 2023
- Realizing High Thermoelectric Performance in n‐Type Se‐Free Bi2Te3 Materials by Spontaneous Incorporation of FeTe2 NanoinclusionsEnergy & Environmental Materials, 2023
- High‐Performance Industrial‐Grade p‐Type (Bi,Sb)2Te3 Thermoelectric Enabled by a Stepwise Optimization StrategyAdvanced Materials, 2023
- Design of N‐Type Textured Bi2Te3 with Robust Mechanical Properties for Thermoelectric Micro‐Refrigeration ApplicationAdvanced Science, 2022
- Nanotwins Strengthening High Thermoelectric Performance Bismuth Antimony Telluride AlloysAdvanced Science, 2022
- Synergistic Compositional–Mechanical–Thermal Effects Leading to a Record High zT in n‐Type V2VI3 Alloys Through Progressive Hot DeformationAdvanced Functional Materials, 2018
- Multi‐Scale Microstructural Thermoelectric Materials: Transport Behavior, Non‐Equilibrium Preparation, and ApplicationsAdvanced Materials, 2017
- Mechanically Robust BiSbTe Alloys with Superior Thermoelectric Performance: A Case Study of Stable Hierarchical Nanostructured Thermoelectric MaterialsAdvanced Energy Materials, 2014
- Stabilizing the Optimal Carrier Concentration for High Thermoelectric EfficiencyAdvanced Materials, 2011