Mechanical Properties of Some Metallic Powder Alloys and Their Contribution to the Performance of Diamond Tools Used for Cutting Granite
Open Access
Abstract
This work examined some pre-alloyed cobalt-, iron-, and copper-based powder binder systems—such as those launched commercially under the brand names of Cobalite and Next—in terms of their as-sintered physical-mechanical properties, namely, apparent density, Young´s modulus, yield strength, rupture strength, rupture strain, toughness modulus, and Vickers hardness. These types of sintered products are traditionally used in the fabrication of diamond impregnated tools for cutting granite stones. The following powder binder systems were evaluated: Cobalite HDR pre-alloyed powder, Next 300 pre-alloyed powder, and four other mixtures of these with Cu and Fe powders: Cobalite HDR + 20 wt% Cu; Cobalite HDR + 20 wt% Fe; Next 300 + 20 wt% Cu; Next 300 + 20 wt% Fe. The evaluation methodology aimed to establish criteria for developing new diamond tools and, therefore, it included the measurement of several technological parameters directly related to the cutting performance of the tools (e.g., energy consumption measurements made exclusively in the tool drive motor, forces generated in the tool, tool consumption per unit weight of stone removed by the cutting). The results show the adequacy of the methodology for the optimisation of diamond retention capacity of these types of metal matrices and for improving the working performance of the diamond tools.Keywords
Funding Information
- Fundação para a Ciência e a Tecnologia (UID/EMS/50022/2019)
This publication has 9 references indexed in Scilit:
- A Review of the Diamond Retention Capacity of Metal Bond MatricesMetals, 2018
- An Analysis of the Retention of a Diamond Particle in a Metallic Matrix after Hot PressingArchives of Foundry Engineering, 2017
- 3-D Finite element modelling of diamond pull-out failure in impregnated diamond bitsDiamond and Related Materials, 2017
- Wear performances and mechanisms of ultrahard polycrystalline diamond composite material grinded against graniteInternational Journal of Refractory Metals and Hard Materials, 2016
- Long-term performance of stone-cutting toolsInternational Journal of Refractory Metals and Hard Materials, 2015
- Comparison between Cobalt and Niobium as a Matrix Component for Diamond Impregnated Tools Used for Stone CuttingKey Engineering Materials, 2013
- 3D-modelling of the local plastic deformation and residual stresses of PM diamond–metal matrix compositesComputational Materials Science, 2010
- Wear mechanisms in materials with granitic textures—Applicability of a lateral crack system modelWear, 2009
- Evaluation of the residual stresses due to the sintering process of diamond–metal matrix hot-pressed toolsTheoretical and Applied Fracture Mechanics, 2008