X-ray focusing test and x-ray imaging test by a microcapillary x-ray lens at an undulator beamline
Authors:
- 1 November 1999
- journal article
- conference paper
- Published by AIP Publishing in Review of Scientific Instruments
- Vol. 70 (11) , 4161-4167
Abstract
A first focusing test of the undulator radiation at SPring-8 has been done using two types of x-ray refractive lenses in thin glass capillaries. One (lens No. 1) contained bubbles in a glue whereas the other (lens No. 2) contained bubbles in glycerol. The capillaries had inner diameters of 0.2 and 0.8 mm, respectively. Using x rays of 17–18 keV, the undulator source image was investigated at the focal plane. The spherical aberrations and the field distortions were carefully examined by taking the images of a gold mesh. Lens No. 1 had an advantage of high transmissivity in the hard x-ray region (18% at 18 keV) and high tolerance to severe radiation damage, e.g., photons/s/0.03 of the 18 keV x rays for an exposure time of 1 h. On the other hand, lens No. 2 had an advantage of a large aperture, 0.8 mm, and a small field distortion, e.g., less than 10% inside a diameter of 300 μm.
Keywords
This publication has 14 references indexed in Scilit:
- Beryllium and aluminium refractive collimators for synchrotron radiationJournal of Synchrotron Radiation, 1999
- A refractive collimator for synchrotron radiationApplied Physics Letters, 1999
- Transmission and gain of singly and doubly focusing refractive x-ray lensesJournal of Applied Physics, 1998
- Present Status of SPring-8 Insertion DevicesJournal of Synchrotron Radiation, 1998
- In-vacuum undulators of SPring-8Journal of Synchrotron Radiation, 1998
- Two-Plane Focusing of 30 keV Undulator RadiationJournal of Synchrotron Radiation, 1998
- A compound refractive lens for focusing high-energy X-raysNature, 1996
- Development of foam shell with plastic ablator for cryogenic laser fusion targetJournal of Vacuum Science & Technology A, 1993
- Refractive lens for X-ray focusNature, 1991
- Development of deuterated polystyrene shells for laser fusion by means of a density-matched emulsion methodJournal of Vacuum Science & Technology A, 1991