Design and experimental study of thermal storage PV/T/PCM solar collector
Authors:
Open Access
- 1 October 2019
- conference paper
- Published by IOP Publishing in IOP Conference Series: Earth and Environmental Science
- Vol. 354 (1) , 012014
Abstract
In order to improve photoelectric thermal characteristics and practicability of PV/T collectors, a thermal storage PV/T/PCM solar collector was designed. Flexible copper indium gallium diselenide (CIGS) solar cells was applied in the collector to relieve the impact of operating temperature rise of the heat absorbing plate on the conversion efficiency of the solar cells, and solid phase change material was prepared to simplify integration process of the PV/T/PCM collector. In the meantime, PV/T/PCM solar collector system prototype was designed. The experimental results showed that the temperature of the absorber plate and solar cells of PV/T/PCM system was reduced by 15°C and 20°C respectively compared with PV/T system, while thermal efficiency was increased by 21%. Meanwhile, in PV/T/PCM, the absorber plate had a lower temperature than the solar cells, which thus achieved the purpose of reducing the influence of the absorber plate on solar cells temperature. In addition, the solar cells output power of the PV/T/PCM collector system was increased by 6.7% compared to PV/T collector system.Keywords
This publication has 10 references indexed in Scilit:
- Research on the influence of PV cell to thermal characteristics of photovoltaic/thermal solar systemInternational Journal of Energy Research, 2017
- An experimental investigation on performance analysis of air type photovoltaic thermal collector system integrated with cooling fins designEnergy and Buildings, 2016
- A review of PV–T systems: Thermal management and efficiency with single phase coolingInternational Journal of Heat and Mass Transfer, 2015
- Using phase change materials in photovoltaic systems for thermal regulation and electrical efficiency improvement: A review and outlookRenewable and Sustainable Energy Reviews, 2015
- Thermal Performance of a Hybrid BIPV-PCM: Modeling, Design and Experimental InvestigationEnergy Procedia, 2014
- A review of PV/T technologies: Effects of control parametersInternational Journal of Heat and Mass Transfer, 2013
- Advancement in solar photovoltaic/thermal (PV/T) hybrid collector technologyRenewable and Sustainable Energy Reviews, 2012
- Energy balance model of combined photovoltaic solar-thermal system incorporating phase change materialSolar Energy, 2011
- Natural convection in an internally finned phase change material heat sink for the thermal management of photovoltaicsSolar Energy Materials and Solar Cells, 2011
- Comparison of a small-scale 3D PCM thermal control model with a validated 2D PCM thermal control modelSolar Energy Materials and Solar Cells, 2006