Colour changes and equilibrium moisture content on thermomechanical densified wood
Open Access
- 1 January 2021
- journal article
- research article
- Published by FapUNIFESP (SciELO) in Anais da Academia Brasileira de Ciências
- Vol. 93 (4) , e20200109
Abstract
Color change associated with significative positive improve in physical properties is a challenge in wood research. This study investigated the changes in the color of the Gmelina arborea wood which underwent a thermomechanical densification process. The process was performed by applying three different temperatures (140 °C, 160 °C and 180 °C) with thickness reduction of 20% and 40% using 2.5 MPa equivalent pressure. The color change of the pieces was analyzed through the CIEL * a * b * system. The relationship between the color and the equilibrium moisture content of the densified material was also analyzed. The process reduced the lightness and yellow hue of the wood, with increased red pigment resulting in darker coloration of the treated pieces. The higher temperature used resulted in more significant changes in wood tone and lower equilibrium moisture. The process proved to be effective to change the color and significantly reduce the equilibrium moisture content in wood samples where the density was increase by 20% and 50% compared to natural wood.Keywords
This publication has 14 references indexed in Scilit:
- Surface gloss of lacquered medium density fibreboard panels veneered with thermally compressed birch woodProgress in Organic Coatings, 2018
- Effect of compression combined with steam treatment on the porosity, chemical compositon and cellulose crystalline structure of wood cell wallsCarbohydrate Polymers, 2017
- Effect of thermal rectification on colors of Eucalyptus saligna and Pinus caribaea woodsMaderas. Ciencia y Tecnología, 2014
- Colour in short-term thermo-mechanically densified veneer of various wood speciesEuropean Journal of Wood and Wood Products, 2014
- Changes in surface and mechanical properties of heat treated wood during natural weatheringMeasurement, 2014
- Colour responses of two fast-growing hardwoods to two-step steam-heat treatmentsMaterials Research, 2014
- Características da cor da madeira de pinus afetada por compressão térmicaCiência Florestal, 2013
- Effects of extractives on some properties of bagasse/high density polypropylene compositeCarbohydrate Polymers, 2013
- THE COLOR CHANGING EFFECT OF THE MOISTURE CONTENT OF WOOD MATERIALS ON WATER BORNE VARNISHESBioResources, 2012
- Effects of thermo-hygro-mechanical densification on the surface characteristics of trembling aspen and hybrid poplar wood veneersApplied Surface Science, 2011