Comparison of the Estimation Ability of the Tensile Index of Paper Impregnated by UF-Modified Starch Adhesive Using ANFIS and MLR
Open Access
- 4 November 2022
- journal article
- research article
- Published by MDPI AG in Journal of Composites Science
- Vol. 6 (11) , 341
Abstract
The purpose of the present study is to offer an optimal model to predict the tensile index of the paper being consumed to make veneer impregnated with different weight ratios of modified starch (from 3.18 to 36.8%) to urea formaldehyde resin (WR) containing different formaldehyde to urea molar ratios (MR, from 1.16:1 to 2.84:1) enriched by different contents of silicon nano-oxide (NC, from 0 to 4%) using multiple linear regression (MLR) and adaptive neuro-fuzzy inference system (ANFIS) and compare the precision of these two models to estimate the response being examined (tensile index). Fourier-transform infrared spectroscopy (FTIR) and transmittance electron microscopy (TEM) were also used to analyze the results. The results of studying the adhesive structure using FTIR analysis showed that as the WR increased to the maximum level and MR increased to the average level (3%), more ether and methylene linkage forms due to cross-linking. TEM analysis also indicated that if an average level of silicon nano-oxide is applied, there will be more cross-linking due to the more uniform distribution and suitable interactions between the adhesive and nanoparticles. The modeling results showed that the ANFIS model estimates have been closer to the actual values compared to the MLR model. It can be concluded that the model offered by ANFIS has a higher potential to predict the tensile index of the paper impregnated with the combined adhesive of UF resin and modified starch. However, the MLR model could not offer a good estimate to predict the response. According to the preferred approach to predict the most effective property of resin coated paper, modelling would be useful to the research community and the results are beneficial in industrial applications without spending more cost and time.Keywords
This publication has 44 references indexed in Scilit:
- Online genetic-ANFIS temperature control for advanced microwave biodiesel reactorJournal of Process Control, 2012
- Synthesis, characterization and thermal analysis of urea–formaldehyde/nanoSiO2 resinsThermochimica Acta, 2012
- The effect of ball milling treatment on structure and porosity of maize starch granuleInnovative Food Science & Emerging Technologies, 2011
- The effect of decor paper properties and adhesive type on some properties of particleboardInternational Journal of Adhesion and Adhesives, 2011
- An ANFIS-based approach for predicting the bed load for moderately sized riversJournal of Hydro-environment Research, 2009
- Steady and Dynamic Shear Rheology of Fucoidan‐Buckwheat Starch MixturesStarch - Stärke, 2009
- The influence of lamination technique on the properties of particleboardBuilding and Environment, 2005
- Effects of nanoparticles SiO2 on the performance of nanocompositesMaterials Letters, 2003
- Gelatinization mechanism of potato starchCarbohydrate Polymers, 2002
- Methods for the study of starch retrogradationFood Chemistry, 2000