Evolution of Austenite Grain Size in Continuously Cast Slab during Hot‐Core Heavy Reduction Rolling Process Based on Hot Compression Tests
Authors:
- 7 March 2018
- journal article
- research article
- Published by Wiley in Steel Research International
- Vol. 89 (7)
Abstract
A novel technology called Hot‐core Heavy Reduction (HHR) has been developed to refine the center microstructure of continuously cast slabs, which is rolling at the end of solidification and with large temperature gradient. In this work, plant trials of Hot‐core Heavy Reduction rolling is conducted and show the significant refinement effect on the center microstructure of continuously cast slab. Dynamic recrystallization behavior in Nb–Ti microalloyed slab at high deformation temperature of 1000–1300 °C is further understood using Gleeble‐3800 thermo‐mechanical simulator. The results show that all the austenite grains are largely refined after deformation in hot compression tests. Austenite grains present different morphologies under different deformation temperature. At the temperature of 1100 °C, austenite grains can be significantly refined with increase in the strain and strain rate. While at higher deformation temperature of 1300 °C, austenite grain size cannot be further refined but become coarse to some extent when strain increases to 0.8 and strain rate increases to 10 s−1. Moreover, the dynamic recrystallization model and austenite grain size model are established in the deformation process. Then, the dynamic recrystallization volume fraction and austenite grain size during HHR rolling process can be well reflected by the established models.Keywords
Funding Information
- National Natural Science Foundation of China (51604074)
This publication has 29 references indexed in Scilit:
- Hot Deformation and Dynamic Recrystallization of 17-4 PH Stainless SteelISIJ International, 2013
- Recrystallization of 30Cr2Ni4MoV ultra-super-critical rotor steel during hot deformation. Part Ш: Metadynamic recrystallizationMaterials Science and Engineering: A, 2012
- Modeling the initiation of dynamic recrystallization using a dynamic recovery modelJournal of Alloys and Compounds, 2011
- Study of metadynamic recrystallization behaviors in a low alloy steelJournal of Materials Processing Technology, 2009
- Study of microstructural evolution during metadynamic recrystallization in a low-alloy steelMaterials Science and Engineering: A, 2009
- Dynamic recrystallization behavior covering a wide austenite grain size range in Nb and Nb–Ti microalloyed steelsMaterials Science and Engineering: A, 2003
- Strain-induced precipitation of NbC in Nb and Nb–Ti microalloyed HSLA steelsScripta Materialia, 2002
- The Dynamic, Static and Metadynamic Recrystallization of a Nb-microalloyed Steel.ISIJ International, 2001
- Current issues in recrystallization: a reviewMaterials Science and Engineering: A, 1997
- Control of Centerline Segregation in Continuously Cast Blooms by Continuous Forging Process.ISIJ International, 1995