Towards improved damage location using acoustic emission
- 31 May 2012
- journal article
- research article
- Published by SAGE Publications in Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science
- Vol. 226 (9) , 2141-2153
Abstract
The acoustic emission technique is a passive non-destructive testing technique that has significant potential for use as a structural health monitoring technique for many large-scale structures, allowing continuous global monitoring. The location capability of the acoustic emission technique is its most beneficial attribute; however, the location accuracy can often be limited in complex materials and structures. This article discusses recent advances in the location of acoustic emission signals. The key sources of errors are identified as signal arrival time measurement and processing algorithm limitations. A series of strategies for reducing the effects of both causes of error are presented. Additionally, the results of a case study are used to demonstrate a novel mapping technique for acoustic emission source location of fatigue crack signals in an aircraft landing gear component. Improvements in location accuracy of up to 87.5% were observed when compared with standard location calculation algorithms.Keywords
This publication has 23 references indexed in Scilit:
- Health monitoring of aerospace composite structures – Active and passive approachComposites Science and Technology, 2009
- Macro-fiber composite piezoelectric rosettes for acoustic source location in complex structuresSmart Materials and Structures, 2007
- Acoustic emission source location methods using mode and frequency analysisStructural Control and Health Monitoring, 2007
- Structural health monitoring of composite wing structure during durability testComposite Structures, 2007
- A first arrival identification system of acoustic emission (AE) signals by means of a high-order statistics approachMeasurement Science and Technology, 2006
- A new method for waveform analysis for estimating AE wave arrival times using wavelet decompositionNDT & E International, 2004
- Wavelet analysis of plate wave propagation in composite laminatesComposite Structures, 2000
- Acoustic Emission Source LocationKey Engineering Materials, 1999
- Source location in thin plates using cross-correlationThe Journal of the Acoustical Society of America, 1991
- Inference about the change-point from cumulative sum testsBiometrika, 1971