Damping Performance of Material Candidates for Service at 350K
Authors:
- 1 March 2021
- journal article
- research article
- Published by Trans Tech Publications, Ltd. in Solid State Phenomena
- Vol. 315, 43-49
Abstract
Vibration systems require the damping materials operating at high service temperature. In this paper, damping performance of HT100, M2052 and S316L at 350K were evaluated by applying different frequencies, strain amplitudes and heating rates. It is found that the internal friction dependence of frequency of HT100, M2052 and S316L all show a characteristic of Check function, and the resonance frequency has a negative linear correlation with the material physical parameters. The strain amplitude as well as heating rate has no obvious effect on the resonance frequencies of the materials, but significantly enhance the internal friction of the interface damping alloys such as M2052 and HT100, but small on single-phase alloys such as S316L. The internal friction mechanism for HT100 and M2052 are of static hysteresis at 350K, and HT100 and M2052 are applicable candidates for working at temperatures around 350K from the viewpoint of vibration reduction.Keywords
This publication has 15 references indexed in Scilit:
- Phenomenological representation of mechanical spectroscopy of high damping MnCuNiFe alloyMaterials Science and Technology, 2020
- An Available Technique for Preparation of New Cast MnCuNiFeZnAl Alloy with Superior Damping Capacity and High Service TemperatureJournal of Visualized Experiments, 2018
- High Damping of Lightweight TiNi-Ti2Ni Shape Memory Composites for Wide Temperature Range UsageJournal of Materials Engineering and Performance, 2017
- Mn segregation dependence of damping capacity of as-cast M2052 alloyMaterials Science and Engineering: A, 2016
- Correlationship between Tensile Properties and Damping Capacity of 316 L Stainless SteelKorean Journal of Materials Research, 2014
- Reverse transformation behavior of a prestrained MnCu alloyActa Materialia, 2006
- Damping caused by microplasticity in porous 316L steelsPhilosophical Magazine, 2005
- The effect of aluminum addition on the damping capacity of cast ironJournal of Materials Science, 2004
- HIGH DAMPING IN GREY CAST IRONLe Journal de Physique Colloques, 1985
- Correlation of the Damping Capacity of Cast Iron with its Mechanical Properties and MicrostructureJournal of Mechanical Engineering Science, 1973