Tailored biodegradable films via extrusion blow molding using PBS, PBAT, and TPS
- 2 November 2023
- journal article
- research article
- Published by Wiley in Journal of Applied Polymer Science
- Vol. 141 (3)
Abstract
Research to replace synthetic polymers with biodegradable polymers is on the rise because common plastics have generated serious ecosystem problems. Films with thermoplastic starch (TPS), poly(butylene succinate) (PBS), poly(butylene adipate‐co‐butylene terephthalate (PBAT), and citric acid (CA) were produced by blown extrusion. They were characterized by blow‐up ratio (BUR), water vapor permeability (WVP), soluble ratio (SR), water sorption isotherm, and thermogravimetric (TG) techniques. Films were uniform and showed BUR > 205%. The different proportions of PBS and PBAT significantly influenced the WVP of the films. All samples had WVP with an order of magnitude similar to other blends with high starch content (10−6 g m−1 day−1 Pa−1). CA efficiently decreased the WVP of the PBS/PBAT/TPS formulations (15/15/70% and 20/10/70% by mass) by 25.2% and 24.7% compared to the acid‐free formulations. There was no significant difference in SR (19.0%–20.1%). These materials were sensitive to moisture since the equilibrium moisture content increased pronouncedly from water activity of 0.5. Films showed good thermal stability, with a maximum decomposition temperature close to pure polyesters. CA did not increase the thermal stability of blends, probably because of the low content used (0.1%). Given the outcomes of this study, these films could be deemed appropriate for applications in food packaging.Keywords
This publication has 57 references indexed in Scilit:
- New engineered biocomposites from poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV)/poly(butylene adipate-co-terephthalate) (PBAT) blends and switchgrass: Fabrication and performance evaluationIndustrial Crops and Products, 2013
- Mixture design applied for the study of the tartaric acid effect on starch/polyester filmsCarbohydrate Polymers, 2013
- Use of transient and steady-state methods and AFM technique for investigating the water transfer through starch-based filmsJournal of Food Engineering, 2012
- Bio-based blends of starch and poly(butylene succinate) with improved miscibility, mechanical properties, and reduced water absorptionCarbohydrate Polymers, 2011
- Biodegradable PBAT/Starch NanocompositesPolymer-Plastics Technology and Engineering, 2010
- Biodegradability of poly(butylene succinate) (PBS) composite reinforced with jute fibrePolymer Degradation and Stability, 2009
- Sorption Behavior of Mixtures of Glycerol and StarchJournal of Agricultural and Food Chemistry, 2007
- Polymer blends and composites from renewable resourcesProgress in Polymer Science, 2006
- Water sorption and mechanical properties of cassava starch films and their relation to plasticizing effectCarbohydrate Polymers, 2005
- Plasticizer Effect on Oxygen Permeability of β-Lactoglobulin FilmsJournal of Agricultural and Food Chemistry, 2000