A comprehensive model for the electrical nanocontact on germanium for scanning spreading resistance microscopy applications
Authors:
- 21 March 2013
- journal article
- conference paper
- Published by AIP Publishing in Journal of Applied Physics
- Vol. 113 (11) , 114310
Abstract
Quantitative carrier profiling represents a key element in the process development of future nanoelectronic devices. During the last decade, scanning spreading resistance microscopy (SSRM) has evolved as the method of choice for two-dimensional carrier mapping due to its unique spatial resolution and high sensitivity when applied to silicon (Si)-based devices. While the electrical nanocontact between a SSRM probe and Si is well documented, the insight is insufficient to understand or make predictions about the properties of the SSRM contact in case of high-mobility germanium (Ge) samples. Therefore, we present in this paper a model describing this contact in more detail, taking into account the effects of the applied pressure as this leads to the formation of a β-Sn pocket right underneath the probe and a spatially non-homogeneous bandgap reduction in the underlying Ge. The resistance probed through the resulting Schottky contact is further influenced by the dimensions of the nanocontact and in particular by the spatial extent of the surface states which are present at the cross-sectional surface. To account for the low-bias IV-characteristics of n-Ge, the model also includes trap-assisted tunneling. Using this model, we are able to describe the role of probe properties such as probe radius and resistivity on the shape (steepness, saturation, non-linearity) of the Ge calibration curve. We demonstrate experimentally and by simulation that low-resistivity probes are indispensable for a high sensitivity when applying SSRM to highly doped samples.Keywords
This publication has 24 references indexed in Scilit:
- Two-dimensional carrier mapping at the nanometer-scale on 32nm node targeted p-MOSFETs using high vacuum scanning spreading resistance microscopySolid-State Electronics, 2012
- Observation of diameter dependent carrier distribution in nanowire-based transistorsNanotechnology, 2011
- Development and optimization of scanning spreading resistance microscopy for measuring the two‐dimensional carrier profile in solar cell structuresPhysica Status Solidi (a), 2010
- High FET Performance for a Future CMOS $\hbox{GeO}_{2}$ -Based TechnologyIEEE Electron Device Letters, 2010
- Experimental studies of dose retention and activation in fin field-effect-transistor-based structuresJournal of Vacuum Science & Technology B, 2010
- Evolution of metastable phases in silicon during nanoindentation: mechanism analysis and experimental verificationNanotechnology, 2009
- 1-nm Spatial Resolution in Carrier Profiling of Ultrashallow Junctions by Scanning Spreading Resistance MicroscopyIEEE Electron Device Letters, 2008
- Progress towards a physical contact model for scanning spreading resistance microscopyMaterials Science and Engineering: B, 2003
- Characterization of a point-contact on silicon using force microscopy-supported resistance measurementsApplied Physics Letters, 1995
- The mechanical behavior of silicon during small-scale indentationJournal of Electronic Materials, 1990