Computational Modeling of Active Corrosion Inhibitor Release from an Al-Co-Ce Metallic Coating
Authors:
- 1 January 2006
- journal article
- Published by The Electrochemical Society in Journal of the Electrochemical Society
- Vol. 153 (11) , B486-B498
Abstract
An Al-Co-CeAl-Co-Ce alloy coating has been developed for an AA2024-T3 substrate that can serve as barrier, sacrificial anode, and reservoir to supply soluble inhibitor ions to protect any defect sites. In this paper, the chemical throwing power of such an Al-Co-CeAl-Co-Ce metallic coating under thin electrolyte films representative of atmospheric conditions is modeled. The geometry is that of an Al-Co-CeAl-Co-Ce surface with the presence of a scratch simulating exposed AA2024-T3. The model calculates the time necessary to accumulate Ce+3Ce+3 and Co+2Co+2 inhibitors over the scratch when released from the Al-Co-CeAl-Co-Ce coating under different conditions. The model factors in the pH-dependent passive dissolution rate of an Al-Co-CeAl-Co-Ce alloy to define the inhibitor release flux. Transport by both electromigration and diffusion are considered together. The effects of scratch size, initial pH, chloride concentration, and electrochemical kinetics of the material involved were studied. Sufficient accumulation of the released inhibitor (i.e., the Ce+3Ce+3 concentration surpassed the critical inhibitor concentration over AA2024-T3 scratches) was achieved within a few hours (e.g., ∼4h∼4h for scratches of S=1500μmS=1500μm ) when the initial solution pH was 6 and the coating was adjacent to the AA2024-T3.Keywords
This publication has 26 references indexed in Scilit:
- Electrochemical Sacrificial Cathodic Prevention Provided by an Al-Co-Ce Metal Coating Coupled to AA2024-T3Journal of the Electrochemical Society, 2005
- Experimental and Modeling Studies of the Oxygen Reduction Reaction on AA2024-T3Journal of the Electrochemical Society, 2005
- Selected Corrosion Properties of a Novel Amorphous Al-Co-Ce Alloy SystemElectrochemical and Solid-State Letters, 2005
- Computational modeling of inhibitor release and transport from multifunctional organic coatingsElectrochimica Acta, 2004
- Storage and Release of Soluble Hexavalent Chromium from Chromate Conversion Coatings on Al Alloys: Kinetics of ReleaseJournal of the Electrochemical Society, 2003
- Dealloying and Corrosion of Al Alloy 2024-T3Journal of the Electrochemical Society, 2002
- Challenges of chromate inhibitor pigments replacement in organic coatingsProgress in Organic Coatings, 2001
- Review of alternatives to chromate for corrosion protection of aluminum aerospace alloysProgress in Organic Coatings, 1998
- Coating Systems on Aluminium Alloys. Formation, Degradation and Stabilization - A SurveyCorrosion Reviews, 1997
- A Molybdate Treatment for Enhancing the Passivity of Aluminum in Chloride‐Containing EnvironmentsJournal of the Electrochemical Society, 1990