Synthesis, characterization and forming behavior of hybrid copper matrix composites produced using powder metallurgy
Authors:
- Ilayaraja KaruppiahIKIlayaraja Karuppiah
- Ranjith Kumar PoovarajRPRanjith Kumar Poovaraj
- Anandakrishnan VeeramaniAVAnandakrishnan Veeramani
- Sathish ShanmugamSSSathish Shanmugam
- Ravichandran ManickamRavichandran Manickam
- Ravikumar RangasamyRRRavikumar Rangasamy
- 14 July 2017
- journal article
- Published by Walter de Gruyter GmbH in International Journal of Materials Research
- Vol. 108 (7) , 586-591
Abstract
Hybrid copper matrix composites containing 5 wt.% of titanium dioxide and varying graphite content (0 wt.%, 2 wt.% and 4 wt.%) were synthesized using powder metallurgy. Metallurgical studies were carried out to examine the presence and distribution of reinforcements in the copper matrix. To investigate the forming behavior of the sintered composite preforms, cold upset tests were conducted from which the true axial stress, the true hoop stress, the true hydrostatic stress and the true effective stress were evaluated and their relationship with the true axial strain was analyzed and presented. It is observed that the increase in addition of weight percentage of graphite into the copper matrix increases the true axial, the true hoop, the true hydrostatic and the true effective stresses. The variation of hardness, strength coefficient and strain hardening with respect to the addition of graphite content is also evaluated and reported.Keywords
This publication has 47 references indexed in Scilit:
- Effect of nanosized SiC particles addition to CP Al and Al–Mg powders on their compaction behaviorPowder Technology, 2013
- Experimental research and compaction behaviour modelling of aluminium based composites reinforced with silicon carbide particlesComputational Materials Science, 2012
- An investigation on the capability of equal channel angular pressing for consolidation of aluminum and aluminum composite powderMaterials & Design (1980-2015), 2011
- High‐temperature mechanical properties of aluminium alloys reinforced with titanium diboride (TiB 2 ) particlesRare Metals, 2011
- Effect of extrusion and particle volume fraction on the mechanical properties of SiC reinforced Al–Cu alloy compositesMaterials Science and Engineering: A, 2010
- Investigation of particle size and amount of alumina on microstructure and mechanical properties of Al matrix composite made by powder metallurgyMaterials Science and Engineering: A, 2010
- Investigation of tribological and mechanical properties Al2O3–SiC reinforced Al composites manufactured by casting or P/M methodMaterials & Design (1980-2015), 2008
- Characterization of a powder metallurgy SiC/Cu–Al compositeJournal of Materials Processing Technology, 2008
- Characterization of aluminum/graphite particulate composites synthesized using a novel method termed “in-situ powder metallurgy”Materials Science and Engineering: A, 2004
- Hot deformation and wear resistance of P/M aluminium metal matrix compositesJournal of Materials Processing Technology, 2004