The influence of surface modification on the structure and properties of a zinc oxide‐filled poly(ethylene terephthalate)
Authors:
- 28 August 2012
- journal article
- research article
- Published by Wiley in Polymer International
- Vol. 62 (3) , 432-438
Abstract
Hydrophobic zinc oxide (ZnO) nanoparticles were successfully prepared by a one‐step precipitation reaction in an aqueous solution of zinc sulfate and sodium hydroxide with stearic acid as the modifying agent. Poly(ethylene terephthalate) (PET)/ZnO nanocomposites were prepared by further in situ polymerization of purified terephthalic acid, ethylene glycol and the ZnO nanoparticles. The surface modification of ZnO and the microstructure and properties of the nanocomposites were investigated using relative contact angle measurements, Fourier transform infrared spectroscopy, X‐ray diffraction, transmission and scanning electron microscopies, thermogravimetric analysis and differential scanning calorimetry. Measurements of relative contact angle indicated that the surface‐treated ZnO was hydrophobic. Compared to the nanocomposite filled with unmodified ZnO, a significant improvement in thermal stability and crystallinity was observed with the addition of 2 wt% surface‐treated ZnO. The experimental results also suggested that the properties of the nanocomposites were correlated with the dispersion of ZnO in PET and the interfacial interactions between ZnO and PET matrix. © 2012 Society of Chemical IndustryKeywords
This publication has 39 references indexed in Scilit:
- Synthesis and characterization of polyurethane/zinc borate nanocompositesColloids and Surfaces A: Physicochemical and Engineering Aspects, 2011
- Preparation, characterization and surface morphology of novel optically active poly(ester-amide)/functionalized ZnO bionanocomposites via ultrasonication assisted processApplied Surface Science, 2011
- Synthesis and characterization of well-dispersed polyurethane/CaCO3 nanocompositesColloids and Surfaces A: Physicochemical and Engineering Aspects, 2010
- Non-isothermal crystallization kinetic of poly(ethylene terephthalate)/fumed silica (PET/SiO2) prepared by in situ polymerizationThermochimica Acta, 2010
- In situ prepared PET nanocomposites: Effect of organically modified montmorillonite and fumed silica nanoparticles on PET physical properties and thermal degradation kineticsThermochimica Acta, 2010
- Thermal degradation mechanism of HDPE nanocomposites containing fumed silica nanoparticlesThermochimica Acta, 2009
- Nylon 6 nanocomposites prepared by a melt mixing masterbatch processPolymer, 2004
- Spherulite growth rates in binary polymer blendsProgress in Polymer Science, 2003
- Nylon 6 nanocomposites by melt compoundingPolymer, 2001
- Structure–property relationships of irradiation grafted nano-inorganic particle filled polypropylene compositesPolymer, 2001