Hardness enhancement of commercially pure aluminium by a typical cyclic heat treatment process involving repeated ice‐brine quenching
Authors:
- 5 February 2025
- journal article
- Published by Wiley in Materialwissenschaft und Werkstofftechnik
- Vol. 56 (2) , 201-211
Abstract
A typical cyclic heat treatment process has been adopted up to four cycles on initially annealed commercially pure aluminium, primarily containing iron impurity, that involves short‐duration (5 minutes) holding at 600 °C followed by ice‐brine quenching in each cycle. As a consequence, a significant grain refinement effect and a gradual accumulation of lattice strain during the progress of cyclic heat treatment are observed in relation to an evolution of the regions of extremely low misorientation angle in the aluminium matrix. Apart from quench‐in strain, the presence of grain boundary iron aluminide phase, possessing a different coefficient of thermal expansion than that of aluminium matrix, appears to be an additional reason for gradual lattice strain development. In addition, a preferred growth of (202) plane along [101] direction towards the final stage of cyclic heat treatment (four cycles) is also revealed. As a result of gradual lattice strain accumulation and grain refinement effects, the hardness of commercially pure aluminium is found to be considerably enhanced (98 HV 10) after 4 cycles of heat treatment as compared to an initial hardness (36 HV 10) in annealed condition.Keywords
This publication has 32 references indexed in Scilit:
- Effects of Cyclic Heat Treatment on Microstructure and Mechanical Properties of 13%Cr-4%Ni Martensitic Stainless SteelJournal of Materials Engineering and Performance, 2020
- Increase in Ductility of High Carbon Steel Due to Accelerated Precipitation of CementiteMetal Science and Heat Treatment, 2017
- Thermal performance determination of binary Fe-Al alloys at elevated temperaturesJournal of Alloys and Compounds, 2017
- Effect of cyclic heat treatment on microstructure and mechanical properties of 50CrV4 steelJournal of Central South University, 2015
- Effect of cyclic heat treatment parameters on the grain refinement of Ti–48Al–2Cr–2Nb alloyMaterials Characterization, 2009
- An analysis of combined cyclic heat treatment performanceJournal of Materials Processing Technology, 2004
- Grain refinement of high-strength maraging steels through cyclic heat treatmentMaterials Science and Engineering, 1978
- The mechanism of hardening in quenched aluminumActa Metallurgica, 1967
- Recrystallization of uranium by the action of cyclic heat-treatmentAtomic Energy, 1958
- X-ray line broadening from filed aluminium and wolframActa Metallurgica, 1953