Summary form only given. This presentation will review the recent advances in electrostatic sensors and instrumentation for industrial measurement and monitoring applications. The fundamental sensing principle and characteristics of electrostatic sensors will be introduced. Case studies that are covered in this presentation include pulverised fuel flow metering, linear and rotational speed measurement and advanced flame monitoring. New techniques have been developed to tackle the well-known measurement challenges in the `dynamic' measurement of coal/air, biomass/air and biomass/coal/air mixture flows in power plant pipes. The flow parameters include velocity, concentration and mass flow rate of particles. Electrostatic sensors in conjunction advanced signal processing algorithms have been developed to measure the flow parameters. Demonstration trials on coal, biomass and old fired power stations will be reported. Particle size distribution is an important input parameter in combustion optimization. On-line continuous measurement of particle size distribution has been achieved through the use of lowcost electrostatic sensors and signal processing algorithms. As particles move through the electrostatic sensor grid and the resulting signal is processed to extract particle sizing information. Lab results will be reported and discussed. Linear and rotational speed measurements using electrostatic sensors have been undertaken in the past few years. Low-cost, strip-type electrostatic sensors along with correlation signal processing algorithms have been used to measure the speed of a moving surface in linear motion or the speed of rotating machinery. Performance and applicability of electrostatic sensors for the condition monitoring of mechanical systems have been assessed through computational modelling and experimentation. Burner flames contain a range of particles such as fuel, char and soot as well as ions. Such particles and ions carry a certain level of net electrostatic charge. Novel electrostatic sensors have been developed to measure a range of physical parameters of the flame, including oscillation frequency, speed and stability. Such characteristic parameters have been used to achieve in-depth understanding and advanced monitoring of burner flames to achieve increased combustion efficiency and reduced pollutant emissions.