Scalable Non-Volatile Chalcogenide Phase Change GeTe-Based Monolithically Integrated mmWave Crossbar Switch Matrix
Authors:
- 7 June 2021
- conference paper
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 420-423
Abstract
This paper reports a novel millimeter-wave (mmWave) non-volatile chalcogenide phase change material (PCM) germanium telluride (GeTe) based scalable crossbar switch matrix. The proposed 2 ×2 crossbar switch matrix configuration is designed using PCM single-pole double-throw (SP2T) switches monolithically integrated with a scalable crossbar unit-cell. The presented switch matrix utilizes a maximum of only two series PCM switches in any possible signal route, minimizing the insertion loss. The non-volatile PCM switches consume no static dc power. The proposed switch matrix is fabricated in-house using an eight-layer custom micro-fabrication process. The 2 ×2 switch matrix is ultra-compact with the device area under 0.1 mm 2 . Over dc to 40 GHz, the fully integrated 2 ×2 switch matrix exhibits a measured insertion loss less than 1.35 dB, a return loss better than 20 dB, and an isolation higher than 24 dB. The integrated PCM switches utilized in this matrix offer up to +35.5 dBm CW RF power handling and better than +41 dBm of linearity. The RF PCM switches are experimentally tested for more than 1 million reliable switch actuation cycles.Keywords
This publication has 18 references indexed in Scilit:
- Characterization of Phase Change Material Germanium Telluride for RF Switches2018
- Chalcogenide Phase Change Material GeTe Based Inline RF SPST Series and Shunt Switches2018
- Electrical conduction in chalcogenide glasses of phase change memoryJournal of Applied Physics, 2012
- Miniature MEMS Switches for RF ApplicationsJournal of Microelectromechanical Systems, 2011
- RF MEMS Satellite Switch MatricesIEEE Microwave Magazine, 2011
- Physics of Semiconductor Devices2006
- CMOS technology characterization for analog and RF designIEEE Journal of Solid-State Circuits, 1999
- Amorphous versus Crystalline GeTe Films. III. Electrical Properties and Band StructureJournal of Applied Physics, 1970
- Amorphous Versus Crystalline GeTe Films. II. Optical PropertiesJournal of Applied Physics, 1969
- Reversible Electrical Switching Phenomena in Disordered StructuresPhysical Review Letters, 1968