Tensile and compressive damage coupling for fully‐reversed bending fatigue of fibre‐reinforced composites
Authors:
- 21 May 2002
- journal article
- research article
- Published by Wiley in Fatigue & Fracture of Engineering Materials & Structures
- Vol. 25 (6) , 547-561
Abstract
Due to their high specific stiffness and strength, fibre‐reinforced composite materials are winning through in a wide range of applications in automotive, naval and aerospace industry. Their design for fatigue is a complicated problem and a large research effort is being spent on it today. However there is still a need for extensive experimental testing or large safety factors to be adopted, because numerical simulations of the fatigue damage behaviour of fibre‐reinforced composites are often found to be unreliable. This is due to the limited applicability of the theoretical models developed so far, compared to the complex multi‐axial fatigue loadings that composite components often have to sustain in in‐service loading conditions.In this paper a new phenomenological fatigue model is presented. It is basically a residual stiffness model, but through an appropriate choice of the stress measure, the residual strength and thus final failure can be predicted as well. Two coupled growth rate equations for tensile and compressive damage describe the damage growth under tension–compression loading conditions and provide a much more general approach than the use of the stress ratio R. The model has been applied to fully‐reversed bending of plain woven glass/epoxy specimens. Stress redistributions and the three stages of stiffness degradation (sharp initial decline – gradual deterioration – final failure) could be simulated satisfactorily.Keywords
This publication has 18 references indexed in Scilit:
- Finite element approach for modelling fatigue damage in fibre-reinforced composite materialsComposites Part B: Engineering, 2001
- Fatigue damage modeling of fibre-reinforced composite materials: ReviewApplied Mechanics Reviews, 2001
- Experimental set-up for and numerical modelling of bending fatigue experiments on plain woven glass/epoxy compositesComposite Structures, 2001
- Anisotropic damage law of evolutionEuropean Journal of Mechanics - A/Solids, 2000
- Micromechanisms in tension-compression fatigue of composite laminates containing transverse pliesComposites Science and Technology, 1999
- Damage accumulation in quasi-isotropic graphite/epoxy laminates under constant-amplitude fatigue and block loadingComposites Science and Technology, 1998
- A PROGRESSIVE QUADRATIC FAILURE CRITERION FOR A LAMINATEComposites Science and Technology, 1998
- Is Crack Closure Due to Fatigue Loading Causing More Damage in Carbon Fibre Reinforced Epoxy Composites ?1990
- Effects of Spectrum Variations on Fatigue Life of Composites1982
- Fatigue of Composites1972