Physical integrity of 3D printed parts for use as embossing tools
- 22 May 2017
- journal article
- research article
- Published by Taylor & Francis in Advances in Materials and Processing Technologies
- Vol. 3 (3) , 308-317
Abstract
On inception, 3D printed parts were typically used at prototyping stage to give the end user/customer a real world concept of how the part may appear when traditional manufacturing techniques were employed for final part fabrication. In this context, mechanical properties such as load bearing capacity or wear rate were not typically of primary concern. This paper investigates, given the advances in 3D printing technology, the potential for using 3D printed parts for high throughput embossing tools. The key mechanical properties for embossing tools are compression and wear rate. To this end, commercially available engineering grade photopolymer materials were characterised in terms of compression and wear using ASTM D695 and ASTM G99 standards respectively. Parts were fabricated via the Polyjet ink-jetting 3D printing technique using the commercially available Connex 260 from Stratasys. Given the nature of the fabrication technique, differences in compressive strength of the material based on orientation of build were also investigated.Keywords
Funding Information
- Enterprise Ireland (IP/2014/0365)
This publication has 14 references indexed in Scilit:
- 3D printed microfluidic devices: enablers and barriersLab on a Chip, 2016
- Additive Manufacturing: Current State, Future Potential, Gaps and Needs, and RecommendationsJournal of Manufacturing Science and Engineering, 2015
- 3D printed metal columns for capillary liquid chromatographyThe Analyst, 2014
- Advances in three-dimensional rapid prototyping of microfluidic devices for biological applicationsBiomicrofluidics, 2014
- Estimating the Uncertainty of Tensile Strength Measurement for A Photocured Material Produced by Additive ManufacturingMetrology and Measurement Systems, 2014
- PolyJet technology for product prototyping: Tensile strength and surface roughness propertiesProceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 2014
- Focussed ion beam serial sectioning and imaging of monolithic materials for 3D reconstruction and morphological parameter evaluationThe Analyst, 2013
- Mechanical properties of parts produced by using polymer jetting technologyArchives of Civil and Mechanical Engineering, 2010
- Hype, hope and hubris: the quest for the killer application in microfluidicsLab on a Chip, 2009
- Study of Trapped Material in Rapid Prototyping PartsThe International Journal of Advanced Manufacturing Technology, 2000