Surface acoustic wave propagation characteristics of aluminum nitride thin films grown on polycrystalline diamond
Author:
- 15 June 2003
- journal article
- conference paper
- Published by AIP Publishing in Journal of Applied Physics
- Vol. 93 (12) , 9604-9609
Abstract
Diamond has the highest surface acoustic wave (SAW) velocity among all materials and thus provides substantial advantages for the fabrication of high-frequency SAW devices when combined with a piezoelectric thin film. The properties of layered film structures consisting of a piezoelectric material layer, aluminum nitride (AlN), and a polycrystalline diamond layer grown on a silicon substrate have been examined. Highly textured AlN thin films have been sputter-deposited onto polycrystalline diamond substrates at room temperature. X-ray diffraction analysis of the multilayer structure as well as atomic force microscope images of the AlN surface indicate that the deposited AlN films were c-axis oriented with a full width at half maximum of the rocking curve of the AlN-002-peak of 2.1°. The thickness of the AlN layer was of 4.3 μm, whereas the diamond layer was 50 μm thick and resting on a 3-in Si wafer. Standard one-port SAW resonators with aluminum (Al) metallization have been subsequently fabricated and evaluated. Experimental results indicate that the fundamental as well as higher Rayleigh SAW modes are excited. Thus, the phase velocities of the first, second, third, and fourth mode are found to be 6.850, 10.000, 11.800, and 14.450 m/s respectively. A very good out-of-band rejection of −50 dB was obtained.Keywords
This publication has 15 references indexed in Scilit:
- Surface acoustic wave propagation in aluminum nitride-unpolished freestanding diamond structuresApplied Physics Letters, 2002
- Preparation of AlN and LiNbO3 thin films on diamond substrates by sputtering methodDiamond and Related Materials, 2002
- Analysis of SAW properties of epitaxial ZnO films grown on R-Al/sub 2/O/sub 3/ substratesIEEE Transactions on Ultrasonics, Ferroelectrics, and Frequency Control, 2001
- Synthesis and Surface Acoustic Wave Property of Aluminum Nitride Thin Films Fabricated on Silicon and Diamond Substrates Using the Sputtering MethodJapanese Journal of Applied Physics, 2001
- Aluminum nitride thin films for high frequency applicationsFerroelectrics, 1999
- SAW device applications of longitudinal leaky surface waves on lithium tetraborateIEEE Transactions on Ultrasonics, Ferroelectrics, and Frequency Control, 1998
- Study on Surface Acoustic Wave Characteristics of SiO2/Interdigital-Transducer/ZnO/Diamond Structure and Fabrication of 2.5 GHz Narrow Band FilterJapanese Journal of Applied Physics, 1998
- Theoretical study on SAW characteristics of layered structures including a diamond layerIEEE Transactions on Ultrasonics, Ferroelectrics, and Frequency Control, 1995
- Epitaxial growth and surface acoustic wave properties of lithium niobate films grown by pulsed laser depositionJournal of Applied Physics, 1995
- Longitudinal horizontally polarized leaky and non-leaky SAW in lithium tetraboratePhysics Letters A, 1994